AJCoholic
08-01-2003, 04:56 PM
Since I have not been flying helis very much for the past few years, I have decided to sell my last and favorite machine. It is a Kyosho Concept 30.
I have had the model for years, but it has allmost all upgraded parts (all metal balls, bearings, high volume cnc colling fan, custom stretched boom to allow 550 blades, OS 32 sx with CVEC pipe, NEW NHP 550 3D blades, carbon torque tube tail drive, carbon boom supports, cutom extended length skids, aluminum mixer arms and metal upgrades to head, thrust bearings and roller bearings for flapping head, etc ect. Carbon fins, custom 1 of a kind aluminum tail rotor bellcrank and rear mounted servo/carbon tail rotor pushrod, etc ect! K$S header tank and filler shut off, etc... also the canopy is the helimax lexan one, aftermarket model.
I have customised this heli as my own. Concept 30's are still in production after 15 years and all parts are available. Makes a great beginner heli, and an awesome sport heli capable of mild 3D (flips and looping/rolling manouvers) just not extded inverted stuff unless you modify the mixer arms.
I have put $2000 into this bird over the last 8 or 9 years (new servos, gyro, engine & pipe worth $650 just in the last few years) but am willing to let go cheap, including the one way roller bearing Pegae starter attached to a Hangar 9 starter. (CNC fan and one way system cost me $250)
Includes Century dual rate piezo gyro, and 2 season old hitec 425BB servos.
Asking $400, just add your battery and receiver and go fly.
The NHP blades are 3D 550 carbons, maybe 5 flights on em? Worth $130 from Great Hobbies.
Also, any of the custom parts I will service if they break, but unlikely since they are aluminum.
I can take pics of any part if someone is seriously interested. $400 is cheap for this heli, thats the cost of just a new OS 32SX, Cvec pipe with shipping and tax.
Andrew Coholic
acoholic@nt.net
I have had the model for years, but it has allmost all upgraded parts (all metal balls, bearings, high volume cnc colling fan, custom stretched boom to allow 550 blades, OS 32 sx with CVEC pipe, NEW NHP 550 3D blades, carbon torque tube tail drive, carbon boom supports, cutom extended length skids, aluminum mixer arms and metal upgrades to head, thrust bearings and roller bearings for flapping head, etc ect. Carbon fins, custom 1 of a kind aluminum tail rotor bellcrank and rear mounted servo/carbon tail rotor pushrod, etc ect! K$S header tank and filler shut off, etc... also the canopy is the helimax lexan one, aftermarket model.
I have customised this heli as my own. Concept 30's are still in production after 15 years and all parts are available. Makes a great beginner heli, and an awesome sport heli capable of mild 3D (flips and looping/rolling manouvers) just not extded inverted stuff unless you modify the mixer arms.
I have put $2000 into this bird over the last 8 or 9 years (new servos, gyro, engine & pipe worth $650 just in the last few years) but am willing to let go cheap, including the one way roller bearing Pegae starter attached to a Hangar 9 starter. (CNC fan and one way system cost me $250)
Includes Century dual rate piezo gyro, and 2 season old hitec 425BB servos.
Asking $400, just add your battery and receiver and go fly.
The NHP blades are 3D 550 carbons, maybe 5 flights on em? Worth $130 from Great Hobbies.
Also, any of the custom parts I will service if they break, but unlikely since they are aluminum.
I can take pics of any part if someone is seriously interested. $400 is cheap for this heli, thats the cost of just a new OS 32SX, Cvec pipe with shipping and tax.
Andrew Coholic
acoholic@nt.net