Jerzy
07-29-2006, 09:12 AM
For sale;
a)Brand new MTM - 400H (2250 KV) brushless outrunner from Parker Model, good up to 15Amps- 2-3 cells Lipoly , direct drive 6"x3" prop or geared with any GWS 400 size gearboxes - props 9"x5" to 12"x8" , also good motor replacement for helicopters, ducted fans
Weight-40g , dia 27.5mm 3.2mm shaft
http://www.skatty-products.com
Price - SOLD !!!!
b)MP Jet AC 28/7-35D brushless outrunner ,new motor- installed a few times on the model and tested , but never seen air.
1-3/8" diameter, 1-5/16" deep, 3mm prop shaft, 2 oz. Use with 7-10 Nicad or NiMh cells, or 3 cell Lithium Polymer pack and an APC prop from 7x3 to 10x4.7. 950 RPM/Volt
http://www.hobby-lobby.com/brushless-mpjet.htm
Price 46.00 +shipping
Contact: Jerzy at jerzyb@efni.com
a)Brand new MTM - 400H (2250 KV) brushless outrunner from Parker Model, good up to 15Amps- 2-3 cells Lipoly , direct drive 6"x3" prop or geared with any GWS 400 size gearboxes - props 9"x5" to 12"x8" , also good motor replacement for helicopters, ducted fans
Weight-40g , dia 27.5mm 3.2mm shaft
http://www.skatty-products.com
Price - SOLD !!!!
b)MP Jet AC 28/7-35D brushless outrunner ,new motor- installed a few times on the model and tested , but never seen air.
1-3/8" diameter, 1-5/16" deep, 3mm prop shaft, 2 oz. Use with 7-10 Nicad or NiMh cells, or 3 cell Lithium Polymer pack and an APC prop from 7x3 to 10x4.7. 950 RPM/Volt
http://www.hobby-lobby.com/brushless-mpjet.htm
Price 46.00 +shipping
Contact: Jerzy at jerzyb@efni.com