A6M Zero

[scaleguy]

There was some interest in the A6M Zero but it was a specific question.

I thought I would just post this as it's own thread for those that might be interested.

http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/th_zero-engeer-2.jpg (http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/zero-engeer-2.jpg) http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/th_zero-engeer-1.jpg (http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/zero-engeer-1.jpg) http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/th_zero-3v.jpg (http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/zero-3v.jpg)

http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/th_ZERO-specs.jpg (http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/ZERO-specs.jpg) http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/th_ZERO-SEN-1.jpg (http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/ZERO-SEN-1.jpg) http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/th_ZERO-float-3v.jpg (http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/ZERO-float-3v.jpg) http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/th_ZERO-cs1.jpg (http://i4.photobucket.com/albums/y143/flyingtigers/A6M%20Zero/ZERO-cs1.jpg)

[Concordefan]

Thanks Jim, these are the drawings i was looking.

I am posting picture of my new Zero that needs cowl to be fabricated from scratch. You can see side are flat and top and bottom are only round parts.

[scaleguy]

Thanks Jim, these are the drawings i was looking.

I am posting picture of my new Zero that needs cowl to be fabricated from scratch. You can see side are flat and top and bottom are only round parts.

Sammy,

Why worry about scale drawings then, just makeup something that looks about right or you could do round anyways and then you will have exit holes for your engine cooling. :D :D

[Concordefan]

Jim,

You know how it goes, this way i can get few scale features built on the cowl, though its flat sided but still be closer to scale.... :wink:

[F86_SABRE]

ZERO SCALE DRAWINGS

Hi Jim,

I have bumped into this thread today. Is there any chance of having the ZERO scale drawings with higher resolution please? They seem to be very interesting scale drawings.

Much obliged.

Thanks

Reuben

[scaleguy]

ZERO SCALE DRAWINGS

Hi Jim,

I have bumped into this thread today. Is there any chance of having the ZERO scale drawings with higher resolution please? They seem to be very interesting scale drawings.

Much obliged.

Thanks

Reuben

Hi Reuben,

What kind of res do you need? Any specific format? Does your ISP alow large file sizes in email? If so use the email button in this post to send me your email address.

[F86_SABRE]

Hi Jim,
Thanks for your mail. I would very much appreciate it if it is anything between 300 - 600 dpi. I believe my mail can take up to 10mb per shot. JPG is quite good but any other traditional file extension will be ok. I can convert it to anything as I have Corel too.
If it is ok with you I will pm you my email.

Thanks ever so much.

Regards

Reuben