|
|
|
| Sailplanes / Electro-gliders Discuss quiet flight in Canada. |
Topic Review (Newest First)
|
| 01-17-2017 07:46 PM | |
| cramam |
Re: Euphoria F3J/F5J glider Bolt Depot online here in US has them in stainless for 5 cents a piece. Carry a lot of other things too. Thanks again. Marc |
| 01-17-2017 05:06 PM | |
| Alex N. |
Re: Euphoria F3J/F5J glider No problem. You can buy any metric screws on ebay for cheap if you do not have it in local stores |
| 01-17-2017 05:02 PM | |
| cramam |
Re: Euphoria F3J/F5J glider Thanks Alex. I thought the 10mm one was a little short. Marc |
| 01-17-2017 04:58 PM | |
| Alex N. |
Re: Euphoria F3J/F5J glider The main screws are 15mm including screw head, elevator screw is 11.5mm |
| 01-17-2017 04:51 PM | |
| Alex N. |
Re: Euphoria F3J/F5J glider Let me minute) |
| 01-17-2017 04:48 PM | |
| cramam |
Re: Euphoria F3J/F5J glider Alex, If you could, please measure the length of your horizontal stab screws and let me know? Thanks, Marc |
| 01-17-2017 04:44 PM | |
| Alex N. |
Re: Euphoria F3J/F5J glider Hi Marc, The builder supply model with two same length stab screws. Only elevator screw (2mm dia.) is shorter and it is critical because elevator horn has no through threaded hole |
| 01-17-2017 04:35 PM | |
| cramam |
Re: Euphoria F3J/F5J glider I have another question about the machine screws that hold the horizontal stab to the pylon. I have one which is 10mm in length and the other is 12mm. The 10mm seems a bit short. Are they supposed to be different lengths or should they be the same length as I would assume and what is the correct length? I have the V2 with the solid horizontal and vertical stab. Thanks |
| 11-07-2016 09:34 PM | |
| cramam |
Re: Euphoria F3J/F5J glider Alex, thanks so much for the information. I'm eager to get started but really want to get everything right with this beautiful sailplane. |
| 11-07-2016 09:07 PM | |
| Alex N. |
Re: Euphoria F3J/F5J glider Standard F5J nose has 95mm from front to the canopy opening. It allows use 38mm outrunner (tapped) like Hyperion series and 38mm spinner. However, the builder makes longer nose as well for geared motor only. I have no data for now but may ask club co-member who has longer version to measure. Ballast tube in latest versions comes glued in fuse but can be removed with some time and patience)) |
| This thread has more than 10 replies. Click here to review the whole thread. | |
Your Privacy Choices