|
|
|
| Electronics Discuss radios, chargers, etc... |
Topic Review (Newest First)
|
| 12-30-2015 09:30 AM | |
| Philip Shaw |
Re: Binding problem with AR8000 receiver lol sweet nice to have the easy fix |
| 12-29-2015 03:27 PM | |
| Dutkoski |
Re: Binding problem with AR8000 receiver Ok, every once in awhile, I'm a dummy. The AR8000 has the plug in polarity reversed compared to all the other Spektrum receivers. Go figure ........ The chap at the hobby shop simple plugged in a battery and everything worked. He said it's a common oops. Well, I figured I'd throw him some business, both another AR8000, gave me a deal on the cost, $99.00 from the regular $129.00 |
| 12-28-2015 10:22 PM | |
| Philip Shaw |
Re: Binding problem with AR8000 receiver hope it works also i was useing only a 3 amp align reg from 7.4 to 5.8 volt with a 3gx and 610 and a 620 tail servo when the 3gx loaded up to do all its checks it would draw to many amps and knock out the receiver and the sats would start to blink i changed to a 6 amp reg and no problems at all |
| 12-28-2015 08:54 PM | |
| Dutkoski |
Re: Binding problem with AR8000 receiver Thanks Phillip, I'll go to the Hobby Shop tomorrow and see if that fixes it up, thanks again. |
| 12-28-2015 07:51 PM | |
| Philip Shaw |
Re: Binding problem with AR8000 receiver i had the same problem , i had to buy a brand new sat then it would bind |
| 12-28-2015 07:22 PM | |
| Dutkoski |
Re: Binding problem with AR8000 receiver Yes to all, I was able to bind another receiver, no problems. |
| 12-28-2015 06:42 PM | |
| fsone |
Re: Binding problem with AR8000 receiver Are your Rx Tx batteries fully charged. Is your switch hooked up properly. |
| 12-28-2015 06:10 PM | |
| Dutkoski |
Binding problem with AR8000 receiver I have a Spectrum DX8 and trying to bind it to a new AR8000 receiver. Hook up the bind plug, powered it up and neither the led in the receiver or in the satellite will come on. Was able to bind another receiver, no problem. Anyone provide a suggestion. |
Your Privacy Choices