11-19-2012 08:06 PM |
Recursion |
Re: ATG650 X4 build w/FPV, DJI naza, ATG gimbal and GoPro 3 black ed.
Post some raw video when you get some. Extra bonus for low light. I'm curious how the GoPro 3 performs.
|
11-19-2012 03:42 AM |
imported_paintball_kidz |
Re: ATG650 X4 build w/FPV, DJI naza, ATG gimbal and GoPro 3 black ed.
I actually didnt have a camera while i was building QQ so I couldnt really get any pictures down. Anyways I finished the build tonight, took it out for a maiden and wow, what can I say, the DJI naza is extremely stable. Im going to get some ap shots tomorrow.
NTM 26-28 1000kv
Dji 8045 prop
Turnigy 25amp plush
Dji naza
Futaba 617 fasst
4s2700mah(going to run parallel most likely)
|
11-09-2012 06:59 PM |
imported_paintball_kidz |
Re: AP Quad Journey
I got some stuff in the mail today, 3 sets of 3s500mah25c lipos to power the onboard fpv, 2sets of 4s2700mah25c for flight and a 3s5000mah20c for the ground station. I had these ordered from the hobbyking usa store down to my mailbox in the states, $5 1 day shipping for 6 sets of battery is a might good deal. I also figured since i was already going to pick up my batteries from my mail box, save tax and shipping fees and order a DJI naza from uavproducts.com. Im really liking the size and weight of these zippo 4s 2700mah 25c compact packs, they are wayyy lighter and smaller than my 3s3000mah and 2650mahs. The rest of the gear should be arriving next week.
|
11-04-2012 06:54 AM |
imported_paintball_kidz |
Re: AP Quad Journey
I ended up changing my power system setup, instead of using the NTM 28-26a 1200kv, I got the NTM 28-26 1000KV. Im running 4s setup(share batteries with my AJ Slick) so a lower kv motor would be better. I ended up ordering a DJI naza so Im really excited.
|
11-03-2012 07:41 PM |
imported_paintball_kidz |
Re: AP Quad Journey
Thanks, it's been almost a year since i've flown anything so Im pretty stoked. I sold some stuff and have enough for a dji naza, Im debating whether or not to get it still, pretty big investment. Also deciding on either 4s or 3s, I already have 4 extra sets of packs of 4s from my slick but to buy more cost more than 3s.
|
11-03-2012 12:05 AM |
xv-townboy |
Re: AP Quad Journey
I've seen some of your stuff and it's pretty damn good..I'll be following this thread
|
11-02-2012 11:36 PM |
imported_paintball_kidz |
ATG650 X4 build w/FPV, DJI naza, ATG gimbal and GoPro 3 black ed.
It's winter time now and I pretty much have enough money saved from working all summer and a lot of time so I'm going to start up Aerial photography again. I didnt want to work with a plane this time so I'm building a quadcopter. I figure start small, then once I get more experience work my way onto something bigger. Right now I plan on using my original HD GoPro, but Im getting a Gopro hero 3, black edition to shoot 4K footage in the air. I will be flying through FPV on a dedicated camera and Gopro on stabilized Gimbal. I dont plan on going further than 1km, the downlink is merely for reference as I will be filming for a lot of youtube videos. I received my frame yesterday, assembled it and determined what other parts I need. I made my order tonight off hobbyking so hopefully it'll arrive by next week. Ill make a parts list below.
Downlink:
Lawmate 1.2ghz Vrx
Turnigy 3s5000mah 20c
Sunsky 700mw 1.2ghz Vtx
Inverted V
zippy compact 3s500mah
540 line osd ccd camera
Simple OSD
Quad:
NTM Prop Drive 28-26 1000KV
TURNIGY 3A UBEC
DJI Naza
Turnigy plus 25a
Futaba 617fs
2x Zippy compact 4s 2700mah 25c (4s 5400mah 25c, 1s2p)
Gimbal:
Corona DS329MG tilt
Corona DS929MG pan
GoPro
|