|
|
04-17-2013 01:32 PM | ||
KAPTAN KAOS |
Re: Need Some Help - My first Jet It is cool. Great for speed passes and for very slow flight. |
|
04-17-2013 10:17 AM | ||
bradleyban |
Re: Need Some Help - My first Jet Quote:
|
|
04-17-2013 10:12 AM | ||
KAPTAN KAOS |
Re: Need Some Help - My first Jet Quote:
|
|
04-17-2013 05:24 AM | ||
TBrum |
Re: Need Some Help - My first Jet Thanks guys! I ended up going with (9) Futaba SBUS S3071HV's. I'm a huge fan of SBUS, wanted to run 2S Lipo and S3071's were an economical way to get 150oz-in with those qualities. I also went with the Fut 7008 Rx that has the SBUS and SBUS2 ports and got the battery voltage telemetry for the 18MZ. I'll then be ready when the GPS telemetry module is available in a couple weeks so I can have real time speed and altitude info on my TX! Again, I appreciate the advice!! Trev |
|
04-16-2013 04:38 PM | ||
Pauld |
Re: Need Some Help - My first Jet Quote:
The Fubartaba's will work as well as Savox's. Quality - as in centering and precision is better than quantity - as in huge amounts of torque. Watch the stab - it will only accept 19 mm cases and the high torque stuff is usually 20 or 21 mm. Since you are going s-bus, I would be tempted to go with Futaba's. will keep things like th boom/stab wiring crazy simple although, if you try to use one wire for both rudders and elevators, you will have fun getting the wire across from one side to the other thru the stab. Personally, I hate taking my booms off not so much because of the wires that need to be unplugged, but I love that you can show up to the field, slide the wings on and go fly. Pauld |
|
04-15-2013 05:17 PM | ||
Jeremy300 |
Re: Need Some Help - My first Jet Servo precision and torque is more important than speed. You don't need speed in the servos for jets. You are not stickbanging large movements. When flying at 150+, the servos centering ability becomes very apparent. Chasing trim sucks. Choose precise servos. |
|
04-15-2013 02:54 PM | ||
RickyBoy |
Re: Need Some Help - My first Jet Yes I use Savox in my Jets |
|
04-15-2013 01:25 PM | ||
dboyle |
Re: Need Some Help - My first Jet HI Trevor I use mainly JR 8911 HV for my jets, But I use standard Futaba 124oz for my Elan, you dont need more than that for that jet. They are S3305. |
|
04-15-2013 12:08 PM | ||
bradleyban |
Re: Need Some Help - My first Jet Trev you gotta go BLS. We know how crisp and responsive they make the GS plane feel. Imagine with a jet!! |
|
04-15-2013 12:01 PM | ||
flyingsquirrlemonkey |
Re: Need Some Help - My first Jet you could go savox pretty cheap |
|
This thread has more than 10 replies. Click here to review the whole thread. |