|
|
06-19-2011 12:16 AM | ||||
TBrum |
Re: Assembly Thread - 50cc Top Dawg Edge540 Quote:
That DA60 is STRONG!!!! And if you listen in the video, it's still burbling in the mid-range and on the high end!! T |
|||
06-19-2011 12:10 AM | ||||
TBrum |
Re: Assembly Thread - 50cc Top Dawg Edge540 Quote:
What will happen to my Tx if I do this??? I would hope nothing??? Trev |
|||
06-18-2011 11:25 PM | ||||
Guest |
Re: Assembly Thread - 50cc Top Dawg Edge540 In the video he had the Tx right beside the plane. I have seen that twitchy stuff happen with both 2.4 and 72 mHz when the Tx Antenna doesn't have a clean signal to the Rx. For $hits and giggles, turn on your 2.4 Tx/Rx and place your Tx on a grounded metal object. I am not gonna ruin the surprise. Try it! |
|||
06-18-2011 11:16 PM | ||||
bradleyban |
Re: Assembly Thread - 50cc Top Dawg Edge540 HUH????? |
|||
06-18-2011 11:15 PM | ||||
always flying |
Re: Assembly Thread - 50cc Top Dawg Edge540 looked wicked to me! just leaped out of its own skin power is good thing wooohooo! |
|||
06-18-2011 08:08 PM | ||||
TBrum |
Re: Assembly Thread - 50cc Top Dawg Edge540 Well, I put 1 flight on it today with the rudder servo in the tail for more aft-CG!! Much, much better and the wing-rock was way less!! I still need to make it a bit more tail-heavy for my liking - I was still forcing the tail around more than I like for 3D. What crazy power-to-weight though!! - INSANE!!! This is going to be really fun, once I get it tweaked out!!! T |
|||
06-18-2011 04:05 AM | ||||
wingburner |
Re: Assembly Thread - 50cc Top Dawg Edge540 Wow!!...What a sizzling combo Trevor!! The 60 just drags that plane around like a rag.. |
|||
06-17-2011 11:43 PM | ||||
Guest |
Re: Assembly Thread - 50cc Top Dawg Edge540 What happens if you move the Tx further away from the Rx (plane)? |
|||
06-17-2011 11:37 PM | ||||
Bdegan |
Re: Assembly Thread - 50cc Top Dawg Edge540 Wow...that things jumps like a scared rabbit. Cooooooollll !!!!! Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free! |
|||
06-17-2011 11:16 PM | ||||
TBrum |
Re: Assembly Thread - 50cc Top Dawg Edge540 Humm.. I think I need an HD Camera!!! Keep the pane of the video small to keep it as clear as possible!!! This was the 8th flight of the day today using a Mej 23x10, spinning at an insane 7220rpm and you can hear that the mid-range is still rich! Near the end of the day, I switched to a Vess 24B and it spun 7050rpm still and even more bite - Simply Wicked As it is, the DA60 throws this plane around like a foamy. And the plane is all wing - insane floatation!! I thought the wind was causing the wing-rock, but after the wind calmed down and Jack and I could both see that the plane is simply nose-heavy! - we'll see how it flies with the rudder servo in the tail tomorrow I've been a big grin all night thinking about the power-to-weight ratio of this machine Cheers Trev
|
|||
This thread has more than 10 replies. Click here to review the whole thread. |