|
|
|
| 3D - Aerobatics Discuss 3D |
Topic Review (Newest First)
|
| 11-23-2014 09:44 PM | ||
| bhughes |
Re: Airframe selection (electric) Like one of these http://www.pro-rc.ca/3dhs-40-epp-edge/ http://www.pro-rc.ca/3dhs-41-edge-orange/ http://www.pro-rc.ca/3dhs-42-aj-slick-orange/ http://www.pro-rc.ca/3dhs-42-vyper-bype-blue/ There a few options to consider |
|
| 11-23-2014 07:47 AM | ||
| Lorne @ Pro-RC.ca |
Re: Airframe selection (electric) Quote:
Since that motor is rated at 388 watts I would go with a smaller 40" or 42" airframe. An omega 130g is rated at 700 watts max peak hope this helps |
|
| 11-17-2014 02:20 PM | ||
| cosmith |
Re: Airframe selection (electric) Quote:
I'm currently using an Omega 130g 870Kv motor in an EF Edge 48 EXP with a 50A HobbyWing ESC. I used the same combo to good effect in a 3DHS 48" Edge as well. Both awesome planes! Not sure exactly what the extra 130Kv will do in terms of propping...I run a 14x7, maybe you'll have to go a bit smaller...someone with more experience will have to chime in. |
|
| 11-17-2014 01:43 PM | ||
| stikflyer |
Airframe selection (electric) I know most people select a power system to match the airframe but I am looking for suggestions for an airframe to match a power system. I have an OS 3815-1000Kv motor and Castle Ice lite 50 esc that I won recently and was hoping for a couple suggestions for a good 3D/Acrobatic airframe to go with this combo. Thanks in advance. |
|
Your Privacy Choices