|
|
|
| Nitro, Gas, Lipo chat (RC Car & Truck) All things related to Nitro, Electric & Gas motors... Tuning, experiences, setups and more. |
Topic Review (Newest First)
|
| 05-30-2012 08:52 PM | |
| wparsons |
Re: Best 1/16 scale brushless? I *think* the mini summit has the exact same transmission, but I could be wrong. If it's different, the only difference would be the internal ratio. |
| 05-30-2012 11:50 AM | |
| chriscole1983 |
Re: Best 1/16 scale brushless? Thanks again for your generosity Jamie, but I was thinking stock stock, the Brushless Velineon 380 with matching ESC, purely because my buddy's stock brushless MERV performs amazing. Will, again (and probably the 100th time): thanks for the advice. I think I'll waterproof the receiver and just leave the esc programmed for 3s lipo and run the 2s sparingly, I feel like I'm abusing the ch2 lead by unplugging it and plugging it back in constantly, the teeth on the program card already broke off and I had to Krazy Glue them back to the circuit board But that saved me from trying to find a new leopard program card or even a new esc! I also plan on swapping out the transmission with the Mini Summit tranny if it fits and has any advantages over the stock tranny for bashing |
| 05-29-2012 03:22 PM | |
| Jamie James |
Re: Best 1/16 scale brushless? He mentioned he was thinking of putting the stock guts back in. I was just throwing it out there, it's his if he wants it. Hope you get it figured out. |
| 05-29-2012 12:23 PM | |
| wparsons |
Re: Best 1/16 scale brushless? That motor will run on any ESC that can run a sensorless brushless motor (all brushless ESC's I've seen can do that). The other radio box should fit no problem, the titan 550 is the same diameter as the motor in there and a slight bit longer. In the picture you can see the top is molded with a clearance area to clear the motor. You might have to pull loosen the top motor mount screw and rotate the motor a bit to get the radio box in, but I don't see why it wouldn't work. You *could* try waterproofing the ESC that's in it, there are some guidelines online on how to do it. There's a guy on rcgroups.com that has videos of his esc and receiver running in a jar of water after his waterproofing coating was applied. Bare electronics, not even in their plastic cases. I forget what he uses, but if you look for posts about it in the fast electric section on rcgroups you should find them. |
| 05-29-2012 12:17 PM | |
| chriscole1983 |
Re: Best 1/16 scale brushless? Hey Will, thanks for the parts listings. I took it out last night to run those 2s turnigy packs and had a blast in the dirt. It was my first time returning home without breaking something first. Now I'm hoping the Titan box will fit under the Ez Run, because that would be awesome. Does the Ez Run work with most ESC's? What would I look for in choosing a new (waterproof) ESC? I'm not scrambling to waterproof this thing but if anything does happen to break in the future I will definitely seal it up for some wintertime fun  Oh and Jamie James thank you for the offer but after running brushless there is no alternative for me! |
| 05-29-2012 10:25 AM | |
| wparsons |
Re: Best 1/16 scale brushless? It's running a 4300kv brushless, not sure he'll want to downgrade to a brushed Titan 
|
| 05-29-2012 07:38 AM | |
| Jamie James |
Re: Best 1/16 scale brushless? I have a stock Titan motor you can have. Took it out of my sons Slash. |
| 05-29-2012 07:27 AM | |
| wparsons |
Re: Best 1/16 scale brushless? Hey Chris! The gear on it is a 28 tooth unless you swapped it out. With the taller tires it might be better off with something in the 23-24 tooth range. I did cut the receiver box down to fit, but on the new version of the brushed one (the one the motor mount parts are from) it does show as having a full receiver box with a 550 motor. I didn't bother trying to find the part numbers before, but here they are now: stock vxl radio box: TRA7024 new brushed (550 titan) radio box: TRA7024X New brushed version with 550 motor mounted: |
| 05-29-2012 02:44 AM | |
| chriscole1983 |
Re: Best 1/16 scale brushless?  Bump
|
| 05-27-2012 07:47 PM | |
| chriscole1983 |
Re: Best 1/16 scale brushless? Also a good rim/tire combo for playing in the dirt/bashing? |
| This thread has more than 10 replies. Click here to review the whole thread. | |
Your Privacy Choices