|
|
|
General RC Heli Discussion Discuss general topics on rotary wing aircraft, including construction, Servo's, Gryo's and Stabilizer discussions.
 |
Topic Review (Newest First)
|
| 02-25-2013 06:36 PM | ||
| 1fastdude1 |
Re: Cmpx won't fly Thanks guy for the input guys. I solved the problem. My radio was set for negative pitch and once I corrected the problem I was back to flying and crashing. |
|
| 02-24-2013 11:07 PM | ||
| Guest |
Re: Cmpx won't fly My Blade mCPX can now hover properly and is very stable in the air. I use the RTF DX4e radio. |
|
| 02-22-2013 07:14 PM | ||
| Helimaniac |
Re: Cmpx won't fly If you crashed, make sure the main gear is pushed up all the way. Place your finger on the top of the head and gently push up on the main gear until there is (roughly) 2mm of the main shaft sticking out the bottom of the main gear. |
|
| 02-22-2013 02:36 PM | ||
| greghatt |
Re: Cmpx won't fly those are good places to start, also make sure your pitch curves are set correctly in your radio. |
|
| 02-22-2013 02:25 PM | ||
| lildevilx |
Re: Cmpx won't fly Quote:
but make sure your battery isn't dead, maybe you left it plugged in too long and in got drained pass the no return.... solution: try using another battery Maybe there are some hair/dust that got stuck around the motor shaft of your MCPX Solution: take it a part and remove the hair/dust dying motor? other then that im not too sure~ hope this helps tho |
|
| 02-22-2013 12:52 PM | ||
| 1fastdude1 |
Cmpx won't fly Hey guys, I'm having problems with my mcpx not flying. The heli will hover at full throttle but won't travel up into the air. Any assistance will be appreciated. |
|
Your Privacy Choices