Multirotor Pictures and Videos
Thought I would start a new thread in this new section for posting pictures and videos of multirotors here in Canada.
Maybe post the details of your build (frame, motors, escs, flight controller, etc) and some pictures and flight videos. Be nice to see what other Canadians are doing. |
Re: Multirotor Pictures and Videos
I'll start off with the Hunter VTail I posted in the heli section to kick things off...
Hunter-Vtail by Dialfonzo Frame Quadrino Rev 1E with MultiWii 2.0 (Y4 Config) MT2208-18 1100kv Motors Suppo 10A ESCs Gemfan 8X4.5 ABS Props https://lh6.googleusercontent.com/-U...2019.34.26.jpg More pics here: https://picasaweb.google.com/1081737...aLFonZoFrames# |
Re: Multirotor Pictures and Videos
Here is my 6061 Hexacopter from FPVPilot.com. Its not how it looks today, I've reloacted the battery underneath and i've cleaned some things up, but this is unfortunately the only picture i have of it.
http://i659.photobucket.com/albums/u.../Finished2.jpg Here is a video of it flying around a little. http://i659.photobucket.com/albums/u...dPBackYard.jpg |
Re: Multirotor Pictures and Videos
|
Re: Multirotor Pictures and Videos
|
Re: Multirotor Pictures and Videos
Mark;
cool strobe...a little music...... disco music.....flash back! Garth |
Re: Multirotor Pictures and Videos
This is my same Hex, but with Ghetto landing gear + cheap FPV stuff attached.
Maybe i should name it "GhettoHex" http://i659.photobucket.com/albums/u...FPVLanding.jpg |
Re: Multirotor Pictures and Videos
|
Re: Multirotor Pictures and Videos
2 Attachment(s)
The small unit is a Multiwii Scarab YSix with a WooKong FC and a Sony NEX5n. The larger unit is a new build. It's a DJI S-800. The idea is to use a Photohigher Hero gimbal (when they're released lol) and a D800 Nikon. Fun stuff. This is my first season with MR's and having a blast. I have to comment on the first response to the OP. That's a pretty cool looking design!
|
Re: Multirotor Pictures and Videos
Here's my FPV tricopter based (faithfully) on the RC Explorer 2.5 design.
It's got 10mmx10mm x 50 cm arms (cut down on the table saw from pine 2x4), RC Timer 750kV motors, 30A Turnigy Plush ESCs, HobbyKing KK flight controller, GoPro HD, 10x4.5 props with aluminum proper adapters/spinners, 12V step up/down (really cleans up the video), Spektrum 2.4gHz RX, and a Fox 800 1.2gHz video TX with home made iBCrazy cloverleaf circular-polarized antenna. The FC and RX are in a small tupperware container. The frame body is cut from fibreglass sheet. The GoPro HD has a layerlens lens protector and now flies without the waterproof case; it is mounted with velcro and rubber bands. I use a Zippy Compact 4000mAh lipo and get 10.5 minutes of flight with 20% capacity remaining. It flies great, is optimized for FPV and the frame is dirt cheap to repair. Very practical. Oddly enough, the ugliness seems to get people's attention more than the fancier commercial models. https://lh5.googleusercontent.com/-o.../IMG_00061.jpg |
All times are GMT -5. The time now is 01:27 PM. |
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by vBA CMPS
vBulletin Security provided by
vBSecurity v2.2.2 (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.