Multirotor Pictures and Videos
 

Thought I would start a new thread in this new section for posting pictures and videos of multirotors here in Canada.

Maybe post the details of your build (frame, motors, escs, flight controller, etc) and some pictures and flight videos. Be nice to see what other Canadians are doing.

Re: Multirotor Pictures and Videos
 

I'll start off with the Hunter VTail I posted in the heli section to kick things off...

Hunter-Vtail by Dialfonzo Frame
Quadrino Rev 1E with MultiWii 2.0 (Y4 Config)
MT2208-18 1100kv Motors
Suppo 10A ESCs
Gemfan 8X4.5 ABS Props

https://lh6.googleusercontent.com/-U...2019.34.26.jpg

More pics here:
https://picasaweb.google.com/1081737...aLFonZoFrames#

Re: Multirotor Pictures and Videos
 

Here is my 6061 Hexacopter from FPVPilot.com. Its not how it looks today, I've reloacted the battery underneath and i've cleaned some things up, but this is unfortunately the only picture i have of it.
http://i659.photobucket.com/albums/u.../Finished2.jpg


Here is a video of it flying around a little.
http://i659.photobucket.com/albums/u...dPBackYard.jpg

Re: Multirotor Pictures and Videos
 

Here are a few videos I've made over the last year. I can post pics if requested.







Hope you enjoyed them:-).

Re: Multirotor Pictures and Videos
 

Quick video of the strobe light system I mounted to the Hunter VTail frame.

Re: Multirotor Pictures and Videos
 

Mark;

cool strobe...a little music...... disco music.....flash back!


Garth

Re: Multirotor Pictures and Videos
 

This is my same Hex, but with Ghetto landing gear + cheap FPV stuff attached.

Maybe i should name it "GhettoHex"
http://i659.photobucket.com/albums/u...FPVLanding.jpg

Re: Multirotor Pictures and Videos
 

1/2 km on my 525 quad at Sauble Beach (Thanks for the invite, Buffy!!!! Cant wait to go there again!)
No RTH and using an HK orange RX, I didn't want to venture too far!


Just having some fun at the local schoolyard:

Re: Multirotor Pictures and Videos
 

The small unit is a Multiwii Scarab YSix with a WooKong FC and a Sony NEX5n. The larger unit is a new build. It's a DJI S-800. The idea is to use a Photohigher Hero gimbal (when they're released lol) and a D800 Nikon. Fun stuff. This is my first season with MR's and having a blast. I have to comment on the first response to the OP. That's a pretty cool looking design!

Re: Multirotor Pictures and Videos
 

Here's my FPV tricopter based (faithfully) on the RC Explorer 2.5 design.

It's got 10mmx10mm x 50 cm arms (cut down on the table saw from pine 2x4), RC Timer 750kV motors, 30A Turnigy Plush ESCs, HobbyKing KK flight controller, GoPro HD, 10x4.5 props with aluminum proper adapters/spinners, 12V step up/down (really cleans up the video), Spektrum 2.4gHz RX, and a Fox 800 1.2gHz video TX with home made iBCrazy cloverleaf circular-polarized antenna.

The FC and RX are in a small tupperware container. The frame body is cut from fibreglass sheet. The GoPro HD has a layerlens lens protector and now flies without the waterproof case; it is mounted with velcro and rubber bands.

I use a Zippy Compact 4000mAh lipo and get 10.5 minutes of flight with 20% capacity remaining.

It flies great, is optimized for FPV and the frame is dirt cheap to repair. Very practical. Oddly enough, the ugliness seems to get people's attention more than the fancier commercial models.

https://lh5.googleusercontent.com/-o.../IMG_00061.jpg