BVM F86 and TJ F/12 F16
 

I buy this BVM F86 from this forum a year ago but I have to many other project on the go. The Sabre wings , fuselage and all surface are prime , the holes for hinge are made , all the hardware is complete. Can be made for turbine or electric 120 mm fan , all the duct for a Tam jet EDF 100mm or Stumax fan are in the kit. It's a 1989 kit. But it's BVM kit , very complete:)
Off course no electronic or retracts. I prefer not shipping but I will do @ buyer expense. Price $350 ( bonus an TF 12 S 6400 30C saddle pack)
The next one is the shell: fuselage , stabs , fin and wing with 100 mm duct (only) of a Tam Jet F16 ( all composite)I ad many flight on this one and the airframe need some TLC . I can send you some picture if is any interest . price is $150 +shipping
Thanks

Re: BVM F86 and TJ F/12 F16
 

On the previous picture I'm holding the F16.
Here is a picture of Sabre fuselage.

Re: BVM F86 and TJ F/12 F16
 

I can say the F-16 is a good flyer JC flew it lots at E-Jets Int 2010 in OHIO 4-5 photo's of said F16 are in my photos

http://www.flickr.com/photos/kennethpark/

Look around page 10-13

Re: BVM F86 and TJ F/12 F16
 

where in ontario? im interested in the sabre......how much of it is done? thnx

Re: BVM F86 and TJ F/12 F16
 

I live in Carp 50 Km west of Ottawa.
The plane is almost done , but like any kit from BVM you still have 30% more to do. The big part , glassing wing stab and hatch are done, the plane is ready for paint, but you still have to do the electronic and retract plumbing + cockpit , I did not mention in the ad: the pilot and the cockpit are complete.
Let me know

Re: BVM F86 and TJ F/12 F16
 

more pic of F16, I forget to ad the hatch

Re: BVM F86 and TJ F/12 F16
 

so far the f16 is reserve pending payment

Re: BVM F86 and TJ F/12 F16
 

Hi,what size glow duct fan would the f86 take?

Re: BVM F86 and TJ F/12 F16
 

The F16 is sold
Ray i will check the size fyou

Re: BVM F86 and TJ F/12 F16
 

The plane is made for the Viojet fan 120 mm .I was planning to use my power from the Electra. But you have also an xtra duct ready for a 100 mm fan.