RCCanada - Canada Radio Controlled Hobby Forum
Page 1 of 10 1 2 3 Last »
Show 40 post(s) from this thread on one page

RCCanada - Canada Radio Controlled Hobby Forum (https://www.rccanada.ca/rccforum/index.php)
-   ARF / ARC Aircraft (https://www.rccanada.ca/rccforum/forumdisplay.php?f=130)
-   -   3DHS EDGE 540. 92" , os gt60 (https://www.rccanada.ca/rccforum/showthread.php?t=203682)

avionu 10-02-2013 04:58 AM
3DHS EDGE 540. 92" , os gt60
 
2 Attachment(s)
After 1 year waiting period i got the new edge 92"
The plane it s amasing very good quality yoy ca use any tipe of canister or pipe
I will use os gt 60 engine with 24x8 menz prop and proflow 3d canister
Servos Futaba BLS 172 , 514 oz torq
Powerbox champion with two serial bus receiver and 2 TP lipo 3600

Lorne @ Pro-RC.ca 10-02-2013 06:34 PM
Re: 3DHS EDGE 540. 92" , os gt60
 
332 Attachment(s)
nice plane. let us see the build:D:D:D

I just got notice that our container of 3dhs planes is in Edmonton. Now I just need the truck to get it to our warehouse and start shipping :rock::rock::rock:
Shipment to the GTA should be early next week if all goes well

Bdegan 10-02-2013 09:53 PM
Re: 3DHS EDGE 540. 92" , os gt60
 
Quote:
Originally Posted by Lorne @ Pro-RC.ca (Post 1382727)
nice plane. let us see the build:D:D:D

I just got notice that our container of 3dhs planes is in Edmonton. Now I just need the truck to get it to our warehouse and start shipping :rock::rock::rock:
Shipment to the GTA should be early next week if all goes well
Yeah Baby!!!!!
We are waiting ;)



Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!

avionu 10-02-2013 10:16 PM
Re: 3DHS EDGE 540. 92" , os gt60
 
2 Attachment(s)
I start with servo instalation on the elevators
2 problems
First bls 172 servo they are 2 mm biger that any servo and to fit the servo in stab it s not a easy job. I use a very long file to do the job
Also using 2" swb servo arm you have to install them before you install the servo and it s not easy to put the servo inside with arm on
But i manage to finish the job

avionu 10-02-2013 10:21 PM
Re: 3DHS EDGE 540. 92" , os gt60
 
2 Attachment(s)
I order fro B&E graphics very nice decals
This is the left elevator

bhughes 10-02-2013 10:49 PM
Re: 3DHS EDGE 540. 92" , os gt60
 
Quote:
Originally Posted by avionu (Post 1382808)
I start with servo instalation on the elevators
2 problems
First bls 172 servo they are 2 mm biger that any servo and to fit the servo in stab it s not a easy job. I use a very long file to do the job
Also using 2" swb servo arm you have to install them before you install the servo and it s not easy to put the servo inside with arm on
But i manage to finish the job
When I built my slick I instaled the servo then used long neddle nose plyers to set the screw in after I centered the servo then just pushed the arm to one side to tighten the secondary bolt. I couldn't imagine the wiggling you had to do. Good job I didn't have the paitence to try that

avionu 10-03-2013 10:38 AM
Re: 3DHS EDGE 540. 92" , os gt60
 
2 Attachment(s)
hmm needs lots of decals

Slats! 10-03-2013 11:08 AM
Re: 3DHS EDGE 540. 92" , os gt60
 
I have the same scheme coming and think you can make it look pretty good without going nuts. Too many people overkill stuff these days.

One thing I will probably do is change the stripes to a different color.

Going electric with this sucker...

avionu 10-03-2013 07:32 PM
Re: 3DHS EDGE 540. 92" , os gt60
 
wow electric nice

Slats! 10-03-2013 08:02 PM
Re: 3DHS EDGE 540. 92" , os gt60
 
The white in your picture looks mint. Whats your thoughts on seeing it in the air?


All times are GMT -5. The time now is 02:04 AM.
Page 1 of 10 1 2 3 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by vBA CMPS
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.