[dccoop]

A few more updates. Got the throttle servo mounted inside the engine box.
Throttle is hooked up on the opposite side from the arm. Glued box in place.
Mounted the engine and siliconed the radial in the cowl. Cut the bottom cylinder out for cooling. Changed the 45 degree spark plug cap for a 90 degree cap and installed the ignition module. Put a T fitting in the fuel line for the fuel dot fill line.
Installed another servo in the fuse with a micro switch to turn the landing lights on when I put the flaps down. Will use a Y harness on one of the flap channels to operate the servo. A few pics of the progress.
Doug