RCCanada - Canada Radio Controlled Hobby Forum - View Single Post

Vulcan1 · 10-20-2005, 12:00 PM

Mike,
Not sure if I am right on this but if you look at the specs your 2300 is a way up in rpm(12,600) to develop the HP. The 3250(7,700) is developing it's power at a more reasonable level. If you bring the 2300 down to the same rpm I believe it would be nowhere near the same specs. Probably about half. The easiest way is if you can find a torque/hp chart for each one and compare.
Your 3250 should provide more torque and swing a larger prop at lower rpm,s.
John

10-20-2005, 12:00 PM	#2
Vulcan1 RCC Supreme Contributor I am: John Davidson Join Date: Feb 2003 Location: Vulcan,Alberta Radio of choice: EVO(12), Futaba # of RCs: ? Feedback: 0 / 0% Posts: 2,927 Total Props: 0	Mike, Not sure if I am right on this but if you look at the specs your 2300 is a way up in rpm(12,600) to develop the HP. The 3250(7,700) is developing it's power at a more reasonable level. If you bring the 2300 down to the same rpm I believe it would be nowhere near the same specs. Probably about half. The easiest way is if you can find a torque/hp chart for each one and compare. Your 3250 should provide more torque and swing a larger prop at lower rpm,s. John __________________ John Davidson Keep the shiny side up and the wheels down