RCCanada - Canada Radio Controlled Hobby Forum - View Single Post - Boeing B777-300ER 1/40th scale

Struts1 · 05-08-2014, 12:54 AM

Aft fuselage build...
This section was built the same as cockpit section but only difference was the different taper angles on the fuselage sides. On 777s where horizontal stabilizer mounts, that whole section is flat on both sides and that flatness continues to the tailcone while it tapers into a wedge shape..

05-08-2014, 12:54 AM	#9
Struts1 RCC Supreme Contributor I am: Scratch Builder Sam Join Date: Dec 2008 Location: Waterloo, ON Radio of choice: Spectrum DX18 # of RCs: 13 Feedback: 100 / 96% Posts: 4,134 Total Props: 14	Re: Boeing B777-300ER 1/40th scale Aft fuselage build... This section was built the same as cockpit section but only difference was the different taper angles on the fuselage sides. On 777s where horizontal stabilizer mounts, that whole section is flat on both sides and that flatness continues to the tailcone while it tapers into a wedge shape.. Attached Thumbnails __________________ Keeping scale scratch building part of the hobby alive. We'll build new kits or arfs for you and also rebuild your previously crashed models. Radios: Spektrum, Futaba Engines: Electric, Gas and glow Last edited by Struts1; 05-08-2014 at 01:02 AM.