I was building this with a larger motor as an FPV platform, but I've moved on to a different setup.
Plane comes with:
Stock Parkzone servos
E-flite Apprentice motor (BL15)
E-fllite 40A Lite Pro ESC
APC Folding Hub
APC 11x8 Folding Prop
The Apprentice motor has a 5mm shaft, so I bought the APC hub and prop from HobbyHobby recently (brand new). I'll break it down into parts later if it doesn't sell with this configuration.
There's a little velcro on the wings just to assist with holding them in place.
The BL15 is bigger than the stock 480. The idea was to allow for extra power and to help with CG when adding the FPV gear.
Just needs an Rx and Battery.
Asking $125 OBO
Note: I drive to Ottawa often, so I can probably arrange to meet between Oakville and Gatineau.
UPDATE: I've had a few questions about the nose.. and I forgot that I had a couple of spinners from the Apprentice. I removed the prop adapter (visible in Pics 1 & 2) and replaced it will a collet style adapter for a tighter fit (Pic 4 with spinner). One spinner is broken (on for test fit).. the other spinner is new. A couple of small standoff mounts inside would bring it up snug if you wanted a cleaner line. Spinners and collet adapter are now included.
================================================== =======
RCC Classified Quick Rules
- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
================================================== =======