Re: JR - J10X manual
Is that the touch screen version? If so I have the manual for the "AIR" in .pdf format.
PM me your Email and I can boot it off.
Personally I found the 10X a very solid feeling system. However, programming was confusing, especially when it came to flaps as it seems locked to their "Flight Mode" setup. In fact, those two functions share the same switch. One problem was shutting off the switch function to allow for the LH lever now meant I only had servo travel either direction from the mid-point. That was one that simply could not be solved.
I opted to trade it for the 9303 that does have that delay feature for flaps and elevators, (separate from the individual servo slow) but again is only available if flaps are controlled by the 3-position switch, (turned ON/OFF in Code 17 on the 10X) and not the lever. I'm currently working through that now as I have added flaps to Rare Bear and due to their mounting wanted to run a second channel to allow for end point setups on both. Again, some strange effects since when using their pre-programmed option for this the second servo sweep is quite a bit restricted, even with both set to 100% travel.
Had a boo through the 10X manual again and I could not find that option. That may mean it's buried somewhere else I could not locate.
__________________
I know there's money in aviation........I put it there!
Last edited by Cougar429; 02-22-2016 at 04:16 PM.
|