RCCanada - Canada Radio Controlled Hobby Forum - View Single Post

Dave_ORCC · 02-24-2014, 08:45 AM

Some more progress.....

Normally I cover the fuse sides and bottom first and finish with the tail section. Because the control surfaces are still attached and due to the scheme, I decided to change things up a bit and start with that the tail. The tail section and turtle deck proved to be a real PITA, to be honest. Mostly 'cause the rudder was still on and the scheme on the turtle deck has very few reference lines to go from. Only two parallel lines to work from. Frack! That said, I'm pretty happy with how it's coming along. I should be able to finish the fuse off this week and then get into the painting.

02-24-2014, 08:45 AM	#45
Dave_ORCC RCC Contributor I am: Dave R Join Date: Aug 2007 Location: Ottawa Feedback: 2 / 100% Posts: 452 Total Props: 2	Re: Covering Some more progress..... Normally I cover the fuse sides and bottom first and finish with the tail section. Because the control surfaces are still attached and due to the scheme, I decided to change things up a bit and start with that the tail. The tail section and turtle deck proved to be a real PITA, to be honest. Mostly 'cause the rudder was still on and the scheme on the turtle deck has very few reference lines to go from. Only two parallel lines to work from. Frack! That said, I'm pretty happy with how it's coming along. I should be able to finish the fuse off this week and then get into the painting. Attached Thumbnails __________________ Cheers, Dave