Re: Cutting CA hinge locations (and CA hinges)
The way I do it is mark centre line of the trailing edge. Use an Xacto nife to slowly cut the slot or you can go to your LHS >Find small saw blades for Xacto and cut your slots with that. I believe the blade is # 13. Tom The blades are ZONA #13 micro saw blades.
__________________
IN EVERY BALSA TREE IS AN AIRPLANE. YOU JUST HAVE TO TAKE THE TIME TO FIND IT
Last edited by f4u; 05-11-2011 at 04:51 PM.
Reason: New Info
|