RCCanada - Canada Radio Controlled Hobby Forum - View Single Post

Pauld · 01-18-2014, 11:30 PM

Since I had a whole bunch of Hysol mixed up for gluing in the ply plates, I had the rudder tray prepped to use up the leftover glue. Turns out I had lots left so it got glued in. The enlarged holes are for some 9152's in a side/side pull/pull/pull arrangement so the servos will be mechanically cross linked and each servo arm will pull on one rudder cable. (More on that later)

01-18-2014, 11:30 PM	#40
Pauld RCC Supreme Contributor I am: Paul D Join Date: Apr 2005 Location: Coquitlam, B.C. Radio of choice: Fubar S-bus2 -no lock outs :) # of RCs: 10+ Feedback: 19 / 100% Posts: 3,267 Total Props: 41	Re: CARF Tucano Turboprop build by PAULD Since I had a whole bunch of Hysol mixed up for gluing in the ply plates, I had the rudder tray prepped to use up the leftover glue. Turns out I had lots left so it got glued in. The enlarged holes are for some 9152's in a side/side pull/pull/pull arrangement so the servos will be mechanically cross linked and each servo arm will pull on one rudder cable. (More on that later) Attached Thumbnails __________________ Paulomite http://www.jetpilots.org/ MAAC Jet Committee IF IT'S TOO LOUD - YOU'RE TOO OLD! 2L club executive member