RCCanada - Canada Radio Controlled Hobby Forum - View Single Post - Hangar 9 Sopwith Camel .60 Wing incidence and ailerons

cptkirk · 08-06-2011, 08:54 PM

Interesting that Hangar 9 put the bottom attachment point for aileron to aileron linkage in the MIDDLE of the upper surface of the lower aileron and the upper linkage attachment point on the underside at the TRAILING edge of the upper aileron.

The attachment points are light ply glued into the ailerons with a hole drilled in each for the link.

08-06-2011, 08:54 PM	#6
cptkirk RCC Junior Contributor I am: Kirk Rutledge Join Date: Jan 2006 Location: Vernon BC Okanagan Valley Radio of choice: Spektrum DX7s master and DX6i slave # of RCs: 16 Feedback: 9 / 100% Posts: 142 Total Props: 0	Re: Hangar 9 Sopwith Camel .60 Wing incedence Interesting that Hangar 9 put the bottom attachment point for aileron to aileron linkage in the MIDDLE of the upper surface of the lower aileron and the upper linkage attachment point on the underside at the TRAILING edge of the upper aileron. The attachment points are light ply glued into the ailerons with a hole drilled in each for the link. __________________ You can fall a thousand times but you're never a failure as long as you try to get back up. Evel Knevel Last edited by cptkirk; 08-07-2011 at 01:46 AM.