RCCanada - Canada Radio Controlled Hobby Forum - View Single Post

1nferno · 07-06-2009, 04:03 PM

check your servo, maybe try another one, if your endpoints are set too far and your servo is opening your carb all the way and straining to go further, you might of stripped a gear or fried something in the board.
A lean top end will do that as well sometimes.

07-06-2009, 04:03 PM	#3
1nferno RCC Contributor Join Date: Jun 2007 Feedback: 0 / 0% Posts: 283 Total Props: 0	check your servo, maybe try another one, if your endpoints are set too far and your servo is opening your carb all the way and straining to go further, you might of stripped a gear or fried something in the board. A lean top end will do that as well sometimes.