Re: Converting a glow engine to electronic ignition.
Not spark ignition experience but the last glo engine I had (before I got sick of the mess) I built an on-board ignition with a little cam on a servo, a micro switch, and two NiMh's. Set it up to come on below 20% throttle and turn off with carb barrel closed. Perfect set-up to eliminate flame outs on final or choking when punching it for a go-around.
__________________
No Bounce-No Play
The one who dies with the most toys wins!
Electric flying is pretty much seeing how close to a dead short you can run without setting it on fire.
34453
Weather Station
|