RCCanada - Canada Radio Controlled Hobby Forum - View Single Post - GTM 1/3 Fokker D-7

SteveD · 03-23-2012, 04:30 PM

Still working on tapering the cylinder heads,also put together some exhaust manifold parts.I took some measurements of the ammo box Mike,remember this is 1/3 scale so you have to reduce the measurements by 25%.For example the overall width on my 1/3 box is 9" so yours would be 9 minus 25% which is 2.25,so 9-2.25= 6.75".Its constucted of 1/16 ply.There was no plan just some photos with instructions...let me know if this is enough info,I could take some pics of the instruction manual if you wish..

03-23-2012, 04:30 PM	#96
SteveD RCC Master Contributor I am: Steven Daly Join Date: Oct 2002 Location: SaultSte Marie On Radio of choice: futaba # of RCs: 10 Feedback: 3 / 100% Posts: 1,063 Total Props: 1	Re: GTM 1/3 Fokker D-7 Still working on tapering the cylinder heads,also put together some exhaust manifold parts.I took some measurements of the ammo box Mike,remember this is 1/3 scale so you have to reduce the measurements by 25%.For example the overall width on my 1/3 box is 9" so yours would be 9 minus 25% which is 2.25,so 9-2.25= 6.75".Its constucted of 1/16 ply.There was no plan just some photos with instructions...let me know if this is enough info,I could take some pics of the instruction manual if you wish.. Attached Thumbnails __________________ Steve Daly MAAC# 14007,Challenger C-IDIM on the shelf;1/6 twin otter,Midwest Harvard,T/F Bonanza,A&A C-310,Hostetler 35% S Decathlon