RCCanada - Canada Radio Controlled Hobby Forum - View Single Post - HK-450 v2 build.

cassat · 05-24-2010, 11:35 AM

Wow, your getting lots of advice.
You need to use that pitch guage a lot !! Hover at 5 1/2 to 6 degrees positive.
Set this at half stick or 3/4 stick Program the radio pitch curve until you get this .
If you need to shorten the links at the head grips for + 9 at the top, go ahead. One
turn will give a lot. The pitch curve does not need to be linear however that is where
you start with the program.

05-24-2010, 11:35 AM	#16
cassat RCC Supreme Contributor I am: Dave Join Date: Jul 2004 Location: P.River,Alberta Radio of choice: Airtronics Aquila,Taranis,DX7 # of RCs: 12 Feedback: 211 / 98% Posts: 7,363 Total Props: 11	Re: HK-450 v2 build. Wow, your getting lots of advice. You need to use that pitch guage a lot !! Hover at 5 1/2 to 6 degrees positive. Set this at half stick or 3/4 stick Program the radio pitch curve until you get this . If you need to shorten the links at the head grips for + 9 at the top, go ahead. One turn will give a lot. The pitch curve does not need to be linear however that is where you start with the program.