I have a used Zenoah G62 for sale.
This engine has just had some work done to it, and has not been run since the work was completed. The work consisted of replacing the bearings and gaskets, replacing the coil (spark plug wire was cracked almost through) and installing a new carb stand off that rotates the carb so that a straight through linkage can be used, no bellcranks.
Additionally, the prop hub has been modified by a fellow club member and machinist so that it has a 10 mm prop shaft mounted in the hub that uses a nut and a jam nut, instead of a bolt into the hub. The prop shaft has been drilled and tapped for a spinner bolt. I am using another of these modified hubs on my other G62 with great success. A number 7 drill bit can be used in a drill press to drill out the hole in the prop.
The muffler and bell mount shown in the pictures are included. Also included is the original carb standoff, and the original muffler.
$400.00 including shipping
Regards,
...jim
================================================== =======
RCC Classified Quick Rules
- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
================================================== =======