Quote:
Originally Posted by Dave Pépin
Stegl,
I have thought about your approach regarding the linkage and I didnt want to make a servo tray in the wing so I think I came up with the next best, best thing!
I will remove the link and allow max room for the landing gear. I will remove the sheeting top and bottom in a scale fasion where the fabric was. Insert a servo in each wing above the aileron and use fabric over the cut out of the wing where the actual airplane had the same fabric.
Still having issues with the retracts to work but we will sort it out.... I hope.
Dave
P.S. The pic is someone elses work that I will emulate.
|
Should be able to get away with only bottom sheeting and then mount the servo on the bottom cover. as most of the arf do it. do it all the time and works great.