Quote:
Originally Posted by Old School Flyer
How noisy are the jc props. Thinking of the 30x8 for the 3w110. As the xoar 30x10 is a bit to much low end load and noisy on the top end
Thanks in advance
|
The JC props are like spinning a 2x4. The JC 30x8 was significantly harder to spin than the Mej30x10 (which isn't far off the Xoar 30x10). I really think the JC 30x8 would make a good prop for a 3D set-up with DA150 that normally likes a 30x12.