|
Here is the crate I am sending for the Yak.
The interior is 30" high, 16"1/4 wide and 96" long. The front dowel is to go into the wing tube and the pipe insulation to be cut so it holds the plane side to side. The rear dowel is for the back of the plane to sit on with holes for a bungee to go over the rear fuse. The rear dowel is extremely well padded. The handles are high making it very unlikely to be loaded upside down. I can stand on the crate so it is plenty strong. I would gestimate the weight w/o plane to be 30-40lbs.
|