Register Now

Chris Cann · 12-13-2003, 12:35 PM

How can i make some cheap supports. I need then for a .60 size spa3dt that i'm making!

AJCoholic · 12-13-2003, 02:58 PM

use long zippy ties. Works for me...

Ian · 12-18-2003, 08:10 PM

I use bike spokes(pushrods too me) and bend them and punch them through into the flutes into the horizontal and vert stabs
really stiffens it up

SpadHawk · 12-19-2003, 07:46 AM

do you glue them in or they just sit in the flutes....a pic or diagram please if you have one......I want to put some on my planes

more speed LOL

Ian · 12-26-2003, 07:47 PM

For my way
I usually bend the last 3 inhes or so at about 30 degrees and poke them through into the flute on the horizontal stab and then bend the other end and poke it through the vertical stab, takes a bit of bending but tis simple and it works well

12-13-2003, 12:35 PM	#1
Chris Cann RCC Supreme Contributor Join Date: Dec 2002 Feedback: 0 / 0% Posts: 2,278 Total Props: 0	Flying suppports for the vert stab and horizontal stab Remove this ad - become a site supporter! How can i make some cheap supports. I need then for a .60 size spa3dt that i'm making!
	.

12-13-2003, 02:58 PM	#2
AJCoholic RCC Supreme Contributor I am: Andrew Coholic Join Date: Sep 2002 Location: Timmins, Northern Ontario Radio of choice: JR 12X, 28X Feedback: 47 / 100% Posts: 12,277 Total Props: 61	use long zippy ties. Works for me... __________________ Andrew Coholic -MAAC #26287L 1/2A to giant scale, IMAC, SAM, R/C sport, turbine jets, Heli's... if its got a wing or two and an engine - I like it!
	.

12-19-2003, 07:46 AM	#4
SpadHawk RCC Contributor I am: Harry K Join Date: Sep 2003 Location: Dryden, Ontario Radio of choice: FrSky Taranis, Horus # of RCs: 23 Feedback: 5 / 100% Posts: 345 Total Props: 0	tail wires do you glue them in or they just sit in the flutes....a pic or diagram please if you have one......I want to put some on my planes more speed LOL __________________ Harry Ketterer MAAC# 68725 Patricia Region Aero Modelers Work is what you do for the love of it. My work is model-building. A job is what I do so I can afford to do my work. SPADS RULE
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-18-2003, 08:10 PM	#3
Ian Guest Join Date: Dec 2002 Feedback: 0 / 0% Posts: 104 Total Props: 0	I use bike spokes(pushrods too me) and bend them and punch them through into the flutes into the horizontal and vert stabs really stiffens it up
	.

12-26-2003, 07:47 PM	#5
Ian Guest Join Date: Dec 2002 Feedback: 0 / 0% Posts: 104 Total Props: 0	For my way I usually bend the last 3 inhes or so at about 30 degrees and poke them through into the flute on the horizontal stab and then bend the other end and poke it through the vertical stab, takes a bit of bending but tis simple and it works well
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in