Register Now

2thelmt · 01-03-2005, 03:28 PM

Top Flite .60 Corsair
Retracts...I read the Robart #605 is the one to use, but the on RCU someone says the robarts are not very good? Did you get your retracts yet? If so , from who?
Ian

3dflyer · 01-03-2005, 03:47 PM

a friend of mine has a corsair tf edition ,with a webra 91 and it also has robart air retracts. great flyer.

voyager_663rd · 01-03-2005, 03:48 PM

nah, not the 605. The ones "called for" are the 615's but they are crappola. The CJ's are a bit more robust but the problem with them is they don't look all that great.

Go here:

Lee Robinson--Robinaire

DO NOT GET THE 615'S for the TF 60.

If you have a few hours to kill, find out why you don't want the Robart 615's

When the Canuckbuck gets high enough, I'll be getting the RCV 90 for it as well (the increasing exchange rate has saved me $100 so far).

Yard ape · 02-01-2005, 09:44 AM

Here are a few pics of the RCV 90 for ya. I'm putting four in my 130" C-130. Also got an Hanger 9 corsair on the build table.

Yard Ape.

01-03-2005, 03:28 PM	#21
2thelmt RCC Senior Contributor I am: ID Join Date: Aug 2003 Location: Acton ON Canada Feedback: 0 / 0% Posts: 611 Total Props: 0	Remove this ad - become a site supporter! Top Flite .60 Corsair Retracts...I read the Robart #605 is the one to use, but the on RCU someone says the robarts are not very good? Did you get your retracts yet? If so , from who? Ian __________________ "The only way of discovering the limits of the possible is to venture a little way past them … into the impossible." - Arthur C. Clarke
	.

01-03-2005, 03:47 PM	#22
3dflyer RCC Expert Contributor I am: marc.c Join Date: Oct 2004 Location: sudbury Radio of choice: hitec a9,jr 9303 # of RCs: 20 Feedback: 3 / 100% Posts: 889 Total Props: 0	a friend of mine has a corsair tf edition ,with a webra 91 and it also has robart air retracts. great flyer. __________________ marc life begins under 10ft and ends at ground zero. fly it like you hate it. troy built sponsored pilot. cambrain rc flyers
	.

02-01-2005, 09:44 AM	#24
Yard ape RCC Contributor I am: Joe D Join Date: Jan 2005 Location: London, Ont Feedback: 5 / 100% Posts: 413 Total Props: 3	Here are a few pics of the RCV 90 for ya. I'm putting four in my 130" C-130. Also got an Hanger 9 corsair on the build table. Yard Ape. Attached Thumbnails
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-03-2005, 03:48 PM	#23
voyager_663rd RCC Supreme Contributor I am: Len, an RPAS pilot Join Date: Sep 2003 Location: Toronto, Ont Feedback: 1 / 100% Posts: 4,650 Total Props: 20	nah, not the 605. The ones "called for" are the 615's but they are crappola. The CJ's are a bit more robust but the problem with them is they don't look all that great. Go here: Lee Robinson--Robinaire DO NOT GET THE 615'S for the TF 60. If you have a few hours to kill, find out why you don't want the Robart 615's When the Canuckbuck gets high enough, I'll be getting the RCV 90 for it as well (the increasing exchange rate has saved me $100 so far).
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in