[Colyn]

I have a pair of MPI voltage regulators I took out of a plane I bought thet were on the ignition and on the radio ,here is a link to TBM
http://www.troybuiltmodels.com/Regul...#MPI%20miracle
I also have the Liop's too a Poly-Quest PQ-3700XP-2S 7.4 volt 3700 Mah
and a Dualsky 1700 Mah 7.4 Volt 2S pack that was on the ignition, the regs have failsafe switches with integral charge jacks, the regs can be used as a redundant system with twin input and out puts aor joined togrther for a single in-output.
No longer required so $100 for the four items shipped, Thanks Colin.

================================================== =======
RCC Classified Quick Rules

- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
================================================== =======

[sugarpops]

Thanks Colin for a good deal!!!!


Harold

[sugarpops]

HI guys, I bought these from Colyn, got a great deal..... but what I want to know is, can I run 2 lipo's and power the ignition and power the servos off just 1 MPI regulator at the same time????


Harold

[Colyn]

Hey Bud the answer is no.....unless you intend to turn the voltage down to 4.8 volts for the receiver power as well as the power for the ignition otherwise the ignition will be getting over 6.0 volts and the possibility of damaging it hope this helps, I guess you could always buy an ignition regulator, Thunderbolt r/c sells them they are good units and well priced too, Colin.