[brentshansen]

I am new to rc trucks what kind of tools will i need .

[imported_BLAZE]

mainly u will need set of hex drivers, philips, flathead, they are handy where ever u go with you car, also a set of pliers, the rest will be noticed when u need it or ull see other ppl that have them

[yel06gt]

nitro or electric? if its nitro i would suggest investing a infered temp guage as a new guy this will help you tune your engine and make sure you dont overheat it (running lean). i use mine all the time, excellent tool they go for about 50 dollars at the local hobby shop.

[jumpingbean]

well for tools you will need a tire wrench but the car kit or rtr you got should have one but its always nice to upgrade same with a glow plug wrench if it is nitro. for tools if there are alot of tricky places to get into, try a ball end hex tool if your car has all hexes. but if it just philips go to canadian tire to get them, there cheaper and better!!! if you have hexes go to your lhs and if you want to spend some money and get an exelent set of tools go with hudy but those are really expensive for tools i use thunder tiger brand tools i got them from amainhobbies.com they are great but you have to wait for them

[tekno]

Originally Posted by brentshansen

I am new to rc trucks what kind of tools will i need .

you will mainly need:
-1mm,1.5mm,2.0mm,2.5mm,3.0mm,5.5mm,7mm hex drivers (hudy,cpv,integy etc rc tools are the best no mastercraft)
-17mm or 23mm hub wheel tool
-flat head
-philips head
-plyers
-vice grips
-needle nose plyers
-glow plug wrench
-clutch tool
-clutch nut tool

[Doc]

Get a really big hammer!!!!! lol.

[spspencer]

all thats stated above, however im not quite sure what the hammer is gonna do lol???

[Doc]

When the time comes, you will know exactly what to do with the hammer, lol!

[imported_RCcanuck]

the bigger the problem the bigger the hammer...LOL