[OICU812]

For Sale:

(1) Perfect working order Kontronik Jazz 55-10-32 ESC

I have redone the heatshrink as the stock red heatshrink was tearing on the corners, I also adhesed by thermal compound a nice heatsink. For those unfamiliar with the Kontroniks this has a perfect working governor internally for RC Helis. This ESC will take up to 10S lipos input and can put through some SERIOUS amps without falter.

Many use this ESC in T-Rex 500s, T-Rex 600s on 8-10S, Protos, Logo 400 and many many more.

Here are some specs:

FEATURES: More features for the advanced pilot
Sensorless, no sensor signals from the motor are required.
Different programmable modes for airplanes, helicopters, gliders,
gliders, cars, boats, competition level and reversible rotation
EMF-brake with variable brake rate, can be disabled
Automatic under voltage disconnection (adjustable)
Switched OFF reason analyzed
Smooth start up, ultra sensitive control characteristics
Sensing and computing of the actual motor data
Audible tones and LED for easy setup
Can be used with Lithium Polymer batteries
Start up protection at power up
Adjustable Soft Start safety feature
Anti-drift, temperature, and current overload protection
Auto Programming Mode for quick and easy setup
100% Surface Mount Technology
Update via internet
RPM control for governing a helicopter's main rotor speed
Two year limited warranty

INCLUDES: One Jazz 55-10-32 Brushless Electronic Speed Control, instruction
manual, three connectors, and three sections of shrink wrap


SPECS: Number of Cells Input: 10-32
BEC: No
Max Constant Current: 55A
Max Surge Current: 70A
Length: 2.1" (52mm)
Width: 1" (25mm)
Thickness: 0.42" (10.6mm)
Li-Po cut off voltage: 3V/cell
Weight: 1.34 ounces (38 grams)

This particular ESC goes for $385.00 Canadian currently

Mine comes with Deans installed as well as BEC tag lines that are heatshrinked and easily accessable if you wish to tie in a BEC, also 4mm female bullet ends to hook up your motor. I do not have the programming pin, however this is no big deal, all you need to do to program is cross two pins, small screwdriver or car keys work perfect and easy to do.

I am asking $200.00 O.B.O for this ESC. Including shipping and I will eat the PP fees! These rarely come up for sale as they work perfect, I just upped my HV heli and needed higher input specs was all.

Please PM me if you are interested, thank you!!

================================================== =======
RCC Classified Quick Rules

- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
================================================== =======

[OICU812]

**Price reduction* !!!

[OICU812]

SOLD thank you