[kip51035]

I purchased a E SKY FMS Simulator complete kit. I also have a copy of the operating system on a CD with 3000 plans on it. Everything seems to operate ok except it completely ignores the controller and my joy-stick. I also have a Reality craft controller and it ignores it too. Has anyone had any experience with system?

Kip

[ByronF]

It would help to know what flavor of Wondoze you are running. Basically you have to setup a game controller/driver and go from there depending on whether you have a game port or usb controller hookup.

[kip51035]

Hi; I am running windows XP, kept up to date. I have a 128 video card. The friend I sold the complete kit to is also running XP about 5 yrs old. I do not know the details of his computer. Like I said both his computer and mine will not recognize the controller. I will have him contact you through this.

Kip

[ByronF]

Kip
That info helps. It should be fairly straightforward. First thing i would suggest is uninstall FMS. Plug the esky tx into the usb port and reinstall fms.
Then go to the control panel and under game controller you should see a listing for ADC controller. If you do then start FMS and go to controls select analog and then select joystick. Then calibrate. You will probably have to changed the numbers for each control to get them set properly otherwise everything is backasswards. Then you are good to go.
If you don't see the ADC controller in the control panel. Then uninstall and try another usb port for the controller and then install FMS again.
If you have a lot of other usb devices try removing them while installing FMS.
You will also need a direct usb connection not thru a hub.
ByronF

[kip51035]

Thanks for the help, I passed the info on to my friend. Kip