Register Now

heliboyz · 07-28-2011, 11:49 PM

Hey,

Can any help with esc on trex 450 pro. Having problem getting it to enage with my dx8. it work on my 6ex radio before i got a new radio and trying to upset on new radio. pls help

thanks

cassat · 07-28-2011, 11:58 PM

First you have to say the magic words
Then try reversing channel #3 in the program menu
Next, go to EPA (end point adjustment) make sure is 0 % with stick at bottom and 0% with stick at top...let us know so others can learn !

**Cougar429** · 07-29-2011, 08:20 AM

I agree. Futaba requires the throttle channel to be set to REV. Only one I believe that needs this. All others can have the throttle set to NORMAL.

At full throttle when powered up the ESC should only go into programming mode. They should not arm, but that's no guarantee.

07-28-2011, 11:49 PM	#1
heliboyz RCC Apprentice I am: Souri Join Date: Jul 2010 Location: woodstock Feedback: 0 / 0% Posts: 49 Total Props: 0	Problem with my e-flite esc 40-amp Remove this ad - become a site supporter! Hey, Can any help with esc on trex 450 pro. Having problem getting it to enage with my dx8. it work on my 6ex radio before i got a new radio and trying to upset on new radio. pls help thanks
	.

07-28-2011, 11:58 PM	#2
cassat RCC Supreme Contributor I am: Dave Join Date: Jul 2004 Location: P.River,Alberta Radio of choice: Airtronics Aquila,Taranis,DX7 # of RCs: 12 Feedback: 211 / 98% Posts: 7,363 Total Props: 11	Re: Problem with my e-flite esc 40-amp First you have to say the magic words Then try reversing channel #3 in the program menu Next, go to EPA (end point adjustment) make sure is 0 % with stick at bottom and 0% with stick at top...let us know so others can learn !
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
E-flite 40 amp ESC, align RCE -BL35G ESC+430 L motor for sale	son tran	FS - Electric Gear	0	10-09-2009 05:58 PM
40-Amp Pro Switch-Mode BEC Brushless ESC by E-flite	dangerous_goods	FS - Electric Gear	0	09-12-2009 06:44 PM
E-Flite 40 amp Brushless ESC	Little T	FS - Electric Gear	1	06-18-2008 01:47 PM
Castle Creations and E-flite 25 amp ESC for a 45-60 Amp ESC	march	Trades Only	0	01-24-2008 11:04 AM
E-Flite 40 amp ESC SOLD	wingburner	FS - Electric Gear	1	10-28-2007 10:09 AM

07-29-2011, 08:20 AM	#3
Cougar429 Level 3 Supporter ★ Site Supporter ★ I am: Gary L Join Date: Aug 2008 Location: Tecumseh, Ontario Feedback: 125 / 100% Posts: 8,686 Total Props: 101	Re: Problem with my e-flite esc 40-amp I agree. Futaba requires the throttle channel to be set to REV. Only one I believe that needs this. All others can have the throttle set to NORMAL. At full throttle when powered up the ESC should only go into programming mode. They should not arm, but that's no guarantee. __________________ I know there's money in aviation........I put it there!
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in