Register Now

prangled prop · 10-02-2003, 02:47 PM

My Pal Sid is having a problem. He is building another 1/3 scale cub (number 8 or 9 I think) he wants to mount a enya 120 in it but the exhaust is causing lots of problems. The pipe that connects the muffler to the cylinder exhaust port is manufactured at an angle that it will cause him to butcher the cowl just to get the exhaust out. He has tried heating the pipe and bending it but is afraid to try bending it more as it looks like the bend maybe folding in and may cause a restriction in exhaust gas flow. Any ideas to help Sid out? The engine is hung inverted and he dose not want to have any more of the exhaust showing than is necessary.

Dennis 9412 · 10-02-2003, 03:45 PM

There is a kit available from MRC that makes use of a bendable pipe that allows you to put the muffler anywhere you like. I'll see if I can dig up a link for you.

DP01 · 10-03-2003, 11:24 AM

Mac's have some Enya exhaust items that may work.

http://www.macspro.com/four_parts.asp

Dennis

10-02-2003, 02:47 PM	#1
prangled prop Guest Join Date: Oct 2002 Feedback: 0 / 0% Posts: 212 Total Props: 0	enya 120 exhaust Remove this ad - become a site supporter! My Pal Sid is having a problem. He is building another 1/3 scale cub (number 8 or 9 I think) he wants to mount a enya 120 in it but the exhaust is causing lots of problems. The pipe that connects the muffler to the cylinder exhaust port is manufactured at an angle that it will cause him to butcher the cowl just to get the exhaust out. He has tried heating the pipe and bending it but is afraid to try bending it more as it looks like the bend maybe folding in and may cause a restriction in exhaust gas flow. Any ideas to help Sid out? The engine is hung inverted and he dose not want to have any more of the exhaust showing than is necessary.
	.

10-02-2003, 03:45 PM	#2
Dennis 9412 RCC Pro Contributor I am: Dennis DuBois Join Date: Dec 2002 Location: Washago, Ontario Radio of choice: Airtronics SD-10G, JR XP9303 # of RCs: 10 Feedback: 24 / 100% Posts: 1,756 Total Props: 6	enya 120 exhaust There is a kit available from MRC that makes use of a bendable pipe that allows you to put the muffler anywhere you like. I'll see if I can dig up a link for you. __________________ Dennis DuBois MAAC 9412L IMAC 3821 CFI Orillia Aeromodelers
	.

10-03-2003, 11:24 AM	#3
DP01 RCC Senior Contributor I am: Dennis P Join Date: Sep 2002 Location: Southern Ontario Feedback: 10 / 100% Posts: 687 Total Props: 3	Mac's have some Enya exhaust items that may work. http://www.macspro.com/four_parts.asp Dennis __________________ "Simplicate and add lightness"
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in