[Ultimateflying]

I have a couple Evolution 58 GX2 engines. One of my ignition modules was damaged. I bought the engine used and don't really know the history on it. But the hall Sensor wires broke basically flush with the module case. The engine ran perfect for a couple runs. Then it started shuddering, die all of a sudden, as well as hard to start. That is when I found the broken wires.
I looked at fixing the wires but they where way to short to work with.

I have looked and I can't find replacement ignitions from Evolution. They are discontinued.

My question is has anyone successfully converted a Evolution 58 GX2 over to a RCxcell ignition. My engine has 2 magnets on the hub. I'm not sure if that would cause a issue with another brand of ignition module or not.

Ultimateflying
Trevor

[R Plante]

Milton at rcextreme power has conversion kits for most brands some of the evolution motors have to be sent to him

[Ultimateflying]

Originally Posted by R Plante

Milton at rcextreme power has conversion kits for most brands some of the evolution motors have to be sent to him

Randy.
Thanks for the info. I will get in touch with Milton and see what has to be done.