Register Now

Vulcan1 · 02-19-2004, 08:40 PM

Ed,
Is that the old saying about everything being used except for the kitchen sink or do you also order the stainless one and use it to.

John

rcbart · 02-19-2004, 08:53 PM

I couldn't find a screen for my RAM 750+ so just got some metal window screen , cut a small hole for the starter and left some screen hanging over the cover and used an O-Ring to hold it down. I then 'formed' it over the case and left it long enough so a larger O-Ring over the case and behind the couple of bolts, holds it fine. It hasn't flown and only had a couple of test runs on a stand but no problems so far. I just cut a hole and peeled back the points over the wires going in.

I STILL want a proper screen, will measure and contac Nony.
Bart

reo · 02-19-2004, 09:14 PM

Hi Guys, if you don't want to build your own screens this fellow in TN will build to order.....mine for the P-120's was $12.00 USD......Ron

http://www.rcuniverse.com/market/item.cfm?itemId=18646

Marty C · 03-12-2004, 03:43 PM

Another option - Heres one I use thats available from TamJets or TJT Canada, fits most KJ 66 class engines. Its very easy to install, just cut holes in mesh with a pair of sharp scissors and its held firmly in place with a large rubber seal/washer that slides over starter, easy eh!

02-19-2004, 08:40 PM	#11
Vulcan1 RCC Supreme Contributor I am: John Davidson Join Date: Feb 2003 Location: Vulcan,Alberta Radio of choice: EVO(12), Futaba # of RCs: ? Feedback: 0 / 0% Posts: 2,927 Total Props: 0	Remove this ad - become a site supporter! Ed, Is that the old saying about everything being used except for the kitchen sink or do you also order the stainless one and use it to. John __________________ John Davidson Keep the shiny side up and the wheels down
	.

03-12-2004, 03:43 PM	#14
Marty C RCC Expert Contributor Join Date: Sep 2002 Location: Sydney, Australia Feedback: 0 / 0% Posts: 980 Total Props: 0	FOD Another option - Heres one I use thats available from TamJets or TJT Canada, fits most KJ 66 class engines. Its very easy to install, just cut holes in mesh with a pair of sharp scissors and its held firmly in place with a large rubber seal/washer that slides over starter, easy eh! Attached Thumbnails __________________ JET FX- Warbirds & Jets www.jetfx.net
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-19-2004, 08:53 PM	#12
rcbart RCC Contributor I am: Bart R. Join Date: Nov 2002 Location: New Westminster, BC Radio of choice: 12x # of RCs: 6 Feedback: 0 / 0% Posts: 294 Total Props: 1	I couldn't find a screen for my RAM 750+ so just got some metal window screen , cut a small hole for the starter and left some screen hanging over the cover and used an O-Ring to hold it down. I then 'formed' it over the case and left it long enough so a larger O-Ring over the case and behind the couple of bolts, holds it fine. It hasn't flown and only had a couple of test runs on a stand but no problems so far. I just cut a hole and peeled back the points over the wires going in. I STILL want a proper screen, will measure and contac Nony. Bart
	.

02-19-2004, 09:14 PM	#13
reo RCC Supreme Contributor I am: Ron O. Join Date: Jan 2004 Location: Millet, AB Feedback: 102 / 100% Posts: 3,639 Total Props: 96	Hi Guys, if you don't want to build your own screens this fellow in TN will build to order.....mine for the P-120's was $12.00 USD......Ron http://www.rcuniverse.com/market/item.cfm?itemId=18646
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in