Register Now

The Real Jet Jockey · 04-26-2016, 11:09 AM

Hello,
I have acquired a 101inch Ziroli stuka that is 95% complete! The guy who built this had great dreams for this plane and it could be a top gun scale airplane, and I would also like to keep it on this path during the final finishing.
THE PROBLEM! I am not even on the same page as this builder when it comes to skill. He started to make a cockpit which is amazing, but is not nearly complete, and the bird also needs paint. I am looking for someone with experience in finishing with scale detail who I could either get to help me out with the cockpit and painting or either pay them to do it for me!
Let me know if you could help me out or know anyone with experience with these type of things!
Cheers,
Mike

Sukhoi 68 · 04-26-2016, 11:15 AM

Mike,
Become a member of RC Scale Builder. They have a section dedicated to Ziroli builds and there are a lot of JU-87's in progress.

Scott

The Real Jet Jockey · 04-26-2016, 11:17 AM

Thanks Scott,
Im ideally the kind of guy that would buy a scale cockpit if one is available and have a body shop paint it!
Ill get on there and take a look!

04-26-2016, 11:09 AM	#1
The Real Jet Jockey RCC Expert Contributor I am: Mike Basso Join Date: Jan 2011 Location: Guelph, Ontario Radio of choice: 12x # of RCs: 30 Feedback: 34 / 100% Posts: 997 Total Props: 4	Scale Finishing! Remove this ad - become a site supporter! Hello, I have acquired a 101inch Ziroli stuka that is 95% complete! The guy who built this had great dreams for this plane and it could be a top gun scale airplane, and I would also like to keep it on this path during the final finishing. THE PROBLEM! I am not even on the same page as this builder when it comes to skill. He started to make a cockpit which is amazing, but is not nearly complete, and the bird also needs paint. I am looking for someone with experience in finishing with scale detail who I could either get to help me out with the cockpit and painting or either pay them to do it for me! Let me know if you could help me out or know anyone with experience with these type of things! Cheers, Mike
	.

04-26-2016, 11:15 AM	#2
Sukhoi 68 RCC Pro Contributor ★ Site Supporter ★ ★ Site Supporter ★ I am: Scott Join Date: Aug 2007 Location: Sherwood Park, Alberta Radio of choice: Futaba 16SZ # of RCs: 4 Feedback: 68 / 100% Posts: 1,998 Total Props: 29	Re: Scale Finishing! Mike, Become a member of RC Scale Builder. They have a section dedicated to Ziroli builds and there are a lot of JU-87's in progress. Scott __________________ 1/4 BUSA DR1/Zen G26, Meister 1/4 Bf109G6/3w80, Meister 1/4 FW190D9/3W110 MAAC 23964 MAAC DZD Alberta, Scale Committee CH NWSAM Alberta Rep. Edmonton Radio Control Society (ERCS) Futaba "The only way to fly"
	.

04-26-2016, 11:17 AM	#3
The Real Jet Jockey RCC Expert Contributor I am: Mike Basso Join Date: Jan 2011 Location: Guelph, Ontario Radio of choice: 12x # of RCs: 30 Feedback: 34 / 100% Posts: 997 Total Props: 4	Re: Scale Finishing! Thanks Scott, Im ideally the kind of guy that would buy a scale cockpit if one is available and have a body shop paint it! Ill get on there and take a look!
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in