[BAMDFISHER]

Originally Posted by G-RIDE

Hi Jim> You can use Any brand-name certified (Spektrum/Hitec) analog/digital servo combination. However: If you connect analog+digital servos in your 8000 rx you have to use 22ms frame rates vs. 11ms 4all digital -
(DX7s Owners manual).

FYI - Digital servos r more linear + + $$.

Happy Flying//g.

You do NOT have to change the frame rate to 11ms when using digital servos.

On RC GROUPS the transmitter software engineer, Andy Kunz commented that the only people who could really tell the difference in feel when using the faster frame rate were very complicated heli setups and very extreme 3D flyers.

There is an excellent thread at:-
http://www.rcgroups.com/forums/showt...7153&page=1768

It has a lot of programming information about your radio. I've learned a lot of neat tricks on how to program my DX18. The thread covers all of the current Spectrum radios.

[davidmc36]

Originally Posted by BAMDFISHER

You do NOT have to change the frame rate to 11ms when using digital servos.

....

I don't think that is what he was saying, he means that you better change it to 22 if you mix analog in as 11 will often burn them out.

[bhughes]

If your using life packs or similar 6.6 sized I would suggest these.
http://www.pro-rc.ca/savox-sh-0251mg...vo-0-18-222-2/
Cheap servo and should be fine for a warbird. I've seen them used in 100cc 3d planes (twin Aileron setups ) and they worked great. My favorite choice but more expensive because their faster and more tourqe and titanium geared is the 1256tg