Register Now

bar98 · 03-03-2004, 01:59 PM

Any one have information about this plane? How to set the controls?

Guest · 03-03-2004, 06:26 PM

Best as I can remember this is about a early 90's design maybe late eightes, shortly before the big mass change in engine displacement rules which changed all the designs.

YS 61AR, or the OS Hanno would be excellent choices for engines if you can get your paws on one. Otherwise it should be able to take a YS 91 or equivelent.

Throws, thats the beauty of pattern, the planes are basically all the same

Starting out 10-15 degrees on ailerons and elevator and 25-35 degrees on the rudder will get you going. Adjusting to personal preference from there. CG generally sits around 30%-33% of the MAC to start out.

These guys have the molds if you ever need replacement parts

http://www.precisionaerocomposite.com/

bar98 · 03-04-2004, 08:28 PM

How many degrees should I put on elevator?

Thanks

rcpilot · 03-04-2004, 08:31 PM

Quote:

Originally Posted by can773

Starting out 10-15 degrees on ailerons and elevator and 25-35 degrees on the rudder will get you going.

03-03-2004, 01:59 PM	#1
bar98 RCC Apprentice Join Date: Jan 2003 Location: Ottawa, ON, Canada Feedback: 1 / 100% Posts: 53 Total Props: 0	LA-1 Pattern Plane Remove this ad - become a site supporter! Any one have information about this plane? How to set the controls?
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-03-2004, 06:26 PM	#2
Guest Guest Join Date: Sep 2002 Feedback: 0 / 0% Posts: 0 Total Props: 57	Best as I can remember this is about a early 90's design maybe late eightes, shortly before the big mass change in engine displacement rules which changed all the designs. YS 61AR, or the OS Hanno would be excellent choices for engines if you can get your paws on one. Otherwise it should be able to take a YS 91 or equivelent. Throws, thats the beauty of pattern, the planes are basically all the same Starting out 10-15 degrees on ailerons and elevator and 25-35 degrees on the rudder will get you going. Adjusting to personal preference from there. CG generally sits around 30%-33% of the MAC to start out. These guys have the molds if you ever need replacement parts http://www.precisionaerocomposite.com/
	.

03-04-2004, 08:28 PM	#3
bar98 RCC Apprentice Join Date: Jan 2003 Location: Ottawa, ON, Canada Feedback: 1 / 100% Posts: 53 Total Props: 0	How many degrees should I put on elevator? Thanks
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in