Register Now

YAKFEVER · 12-22-2008, 08:31 PM

Hello, I am installing a New Style DL100 in my Hangar 9 33% Edge 540 and was wondering if anybody has or knows where to get the drill template.

If you might have one or know where I can get one your help would be great!

Thank you!

Rolly

Oilsands · 12-23-2008, 01:22 AM

ThunderRC, Azure Hobbies are 2 that come to mind. I suggest to get 2 new spark plugs from them as well, since the ones that come with the motor are not as good as the replacements.

Gary Maker · 12-23-2008, 05:08 AM

YAKFEVER wrote: " wondering if anybody has or knows where to get the drill template."

I don't know if this will help or not but if you take the front bolt down plate off the prop shaft, you'll have a ready made template!

Here is the order of pieces so you'd know what part I'm talking about starting back to front....I hope!

Spinner back plate > Prop > Bolt down plate > Prop bolts > Spinner > Spinner bolt!

Actually for my DAs and DL50's I used the bolt plate as a drill jig. Work carefully and it does not harm the piece at all and the holes are perfectly alligned in the prop when the job is finished. I'm cheep, what can I say!

Bdegan · 12-23-2008, 07:18 AM

I think he is looking for the engine mounting template for the firewall.
If Azure can not supply one, Look around online. I am sure there is a downloadable one somewhere.

Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!

YAKFEVER · 12-23-2008, 08:24 AM

Quote:

Originally Posted by Bdegan

I think he is looking for the engine mounting template for the firewall.
If Azure can not supply one, Look around online. I am sure there is a downloadable one somewhere.

Yes. this is correct, I am looking for the pattern to mount my engine correctly to the firewall. This way it is centered ect....

Thank you

Gary Maker · 12-23-2008, 08:25 AM

Ok thanks, sorry, the first thing that popped into mind was drilling the prop holes. I had completely forgotten about the Engine mounting template.

I have one for the DL50 but its probably different for the 100 twin!

rcpilot · 12-23-2008, 09:41 AM

Here is the template, turn off the page scaling when printing.

http://www.flyinggiants.com/forums/a...0-template.pdf

If you don't have flying giants username, PM me your email address and I will send it to you as an attachment.

YAKFEVER · 12-23-2008, 09:45 AM

Quote:

Originally Posted by rcpilot

Here is the template, turn off the page scaling when printing.

http://www.flyinggiants.com/forums/a...0-template.pdf

If you don't have flying giants username, PM me your email address and I will send it to you as an attachment.

Thank you very much!!!!

Rolly

Oilsands · 12-23-2008, 11:57 PM

You can go to PAU website http://www.performancercaircraft.com/html/manuals.html and check the manual for the 36% Edge (second last page). It has one for the DA100 which I believe is the same.

12-22-2008, 08:31 PM	#1
YAKFEVER RCC Senior Contributor Join Date: Oct 2008 Location: Copper Cliff Ontario Feedback: 1 / 100% Posts: 550 Total Props: 0	DA/DL Drill Template for Hangar 9 Edge 540 Remove this ad - become a site supporter! Hello, I am installing a New Style DL100 in my Hangar 9 33% Edge 540 and was wondering if anybody has or knows where to get the drill template. If you might have one or know where I can get one your help would be great! Thank you! Rolly
	.

12-23-2008, 01:22 AM	#2
Oilsands RCC Senior Contributor I am: Anthony Join Date: Oct 2007 Location: Fort McMurray, AB Radio of choice: Futaba 12FG # of RCs: 10 Feedback: 17 / 100% Posts: 640 Total Props: 1	Re: DA/DL Drill Template for Hangar 9 Edge 540 ThunderRC, Azure Hobbies are 2 that come to mind. I suggest to get 2 new spark plugs from them as well, since the ones that come with the motor are not as good as the replacements. __________________ Anthony MAAC#78933 IMAC#5720 PAU Edge 540 36% JTec Extra 330 42% C-arf Yak 55sp 2.8m 2 - Thunder Tiger Raptor 50 v2's (FBL) Hobbico NexStar and a few smaller stuff.
	.

12-23-2008, 05:08 AM	#3
Gary Maker RCC Supreme Contributor I am: Gary M. Join Date: Jul 2003 Location: Stoney Creek, Ontario Radio of choice: Spektrum DX8 # of RCs: 9 Feedback: 34 / 100% Posts: 7,395 Total Props: 9	Re: DA/DL Drill Template for Hangar 9 Edge 540 YAKFEVER wrote: " wondering if anybody has or knows where to get the drill template." I don't know if this will help or not but if you take the front bolt down plate off the prop shaft, you'll have a ready made template! Here is the order of pieces so you'd know what part I'm talking about starting back to front....I hope! Spinner back plate > Prop > Bolt down plate > Prop bolts > Spinner > Spinner bolt! Actually for my DAs and DL50's I used the bolt plate as a drill jig. Work carefully and it does not harm the piece at all and the holes are perfectly alligned in the prop when the job is finished. I'm cheep, what can I say! __________________ Time flies like an arrow - Fruit flys like a banana!GROUCHO MARKS Stoney Creek Hawks RC MAAC No. 43659 Last edited by Gary Maker; 12-23-2008 at 05:18 AM.
	.

12-23-2008, 07:18 AM	#4
Bdegan RCC Supreme Contributor I am: Brad E. Join Date: Sep 2007 Location: Newmarket Radio of choice: Jeti DS-16 # of RCs: 4 Feedback: 32 / 100% Posts: 7,690 Total Props: 41	Re: DA/DL Drill Template for Hangar 9 Edge 540 I think he is looking for the engine mounting template for the firewall. If Azure can not supply one, Look around online. I am sure there is a downloadable one somewhere. Never pay again for live sex! \| Hot girls doing naughty stuff for free! \| Chat for free! __________________ Let Me Think About It Brad Egan MAAC 48597
	.

12-23-2008, 08:25 AM	#6
Gary Maker RCC Supreme Contributor I am: Gary M. Join Date: Jul 2003 Location: Stoney Creek, Ontario Radio of choice: Spektrum DX8 # of RCs: 9 Feedback: 34 / 100% Posts: 7,395 Total Props: 9	Re: DA/DL Drill Template for Hangar 9 Edge 540 Ok thanks, sorry, the first thing that popped into mind was drilling the prop holes. I had completely forgotten about the Engine mounting template. I have one for the DL50 but its probably different for the 100 twin! __________________ Time flies like an arrow - Fruit flys like a banana!GROUCHO MARKS Stoney Creek Hawks RC MAAC No. 43659
	.

12-23-2008, 09:41 AM	#7
rcpilot RCC Supreme Contributor I am: Maqsood Join Date: Nov 2002 Location: Sydney, Australia Feedback: 29 / 100% Posts: 2,333 Total Props: 0	Re: DA/DL Drill Template for Hangar 9 Edge 540 Here is the template, turn off the page scaling when printing. http://www.flyinggiants.com/forums/a...0-template.pdf If you don't have flying giants username, PM me your email address and I will send it to you as an attachment. __________________ Maqsood Ahmad MAAC # 59977 IMAC # 4177 My Website http://home.ica.net/~ahmadm/ My Youtube channel https://www.youtube.com/channel/UCXS...hYlGsXmhcYNn9g
	.

12-23-2008, 11:57 PM	#9
Oilsands RCC Senior Contributor I am: Anthony Join Date: Oct 2007 Location: Fort McMurray, AB Radio of choice: Futaba 12FG # of RCs: 10 Feedback: 17 / 100% Posts: 640 Total Props: 1	Re: DA/DL Drill Template for Hangar 9 Edge 540 You can go to PAU website http://www.performancercaircraft.com/html/manuals.html and check the manual for the 36% Edge (second last page). It has one for the DA100 which I believe is the same. __________________ Anthony MAAC#78933 IMAC#5720 PAU Edge 540 36% JTec Extra 330 42% C-arf Yak 55sp 2.8m 2 - Thunder Tiger Raptor 50 v2's (FBL) Hobbico NexStar and a few smaller stuff.
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

vBulletin Message

Cancel Changes

Register Now

Log-in