[imported_offroader]

I was recently in China checking out some trade shows. I found this 1/5th scale truck which might be a copy of the FireHammer from Duratrax or even the same factory that makes these. Would anyone be interested in these? I know I can get these up here allot cheaper then what you can purchase the Firehammer for locally. Most of the parts are interchangeable as I could see from the parts list of the Firehammer. These will come RTR with radio all you need is batteries and fuel ( unleaded gas which is allot less expensive then nitro) with 2 cycle oil. I have imported a sample and will test it for durability before deciding to bring them in. If response is good I consider to import them. Here are the specs please PM me if you have any questions I'll take more detailed pictures with the body off when I get a chance and post them.

Specifications©U TECHNICAL PARAMETERS
Length -------------------- ------ 695 mm
Width ---------------------------- 520 mm
Height -------------------- ------ 332 mm
Wheelbase(F) ------------------- 380 mm
Wheelbase(R) ------------------- 420 mm
Weight --------------------------- 9630 g
Engine --------------------------- 23 CC
Tread(F/R) ---------------------- 472 mm
Wheel DIA.(F/R)----------------- 200mm*110mm
Gear rate ------------------------ 7.67:1



FEATURE
* ASSEMBLED CHASSIS.
* FULLY POWERFUL 26cc ENGINE EQUIPPED WITH SLIDE WT-603 CARBURETOR.
* EQUIPPED WITH MUFFLER ACCELERATOR AND AIR FILTER.
* TWO WHEEL DRIVE SYSTEM WITH SHAFT DRIVE.
* DIFFERENTIAL WITH THE BUILT-IN REAR BEVEL GEAR.
* DOUBLE WISHBONES SUSPENSION SYSTEM WITH ADJUSTABLE WIDTH.
* OIL-FILLED SHOCK ABSORBER.
* STIFF AND STURDY ALUMINUM CHASSIS.
* DISC BRAKE SYSTEM.
Advantages©U * 200*W110 wheel
* Hight defective side plate
* Waterproof and dust proof receiver box
* 26CC engine


Product Description

1:5 SCALE MONSTER TRUCK 2WD OFF-ROAD, AND THIS IS OFFICIAL LICENSED PRODUCT. 26CC engine. FEATURE * ASSEMBLED CHASSIS. * FULLY POWERFUL 26cc ENGINE EQUIPPED WITH SLIDE WT-603 CARBURETOR. * EQUIPPED WITH MUFFLER ACCELERATOR AND AIR FILTER. * TWO WHEEL DRIVE SYSTEM WITH SHAFT DRIVE. * DIFFERENTIAL WITH THE BUILT-IN REAR BEVEL GEAR. * DOUBLE WISHBONES SUSPENSION SYSTEM WITH ADJUSTABLE WIDTH. * OIL-FILLED SHOCK ABSORBER. * STIFF AND STURDY ALUMINUM CHASSIS. * DISC BRAKE SYSTEM.

[Mr X]

im sure im not the only one to wonder this but whats the price on this bad boy.

[imported_offroader]

Originally Posted by Mr_X

im sure im not the only one to wonder this but whats the price on this bad boy.

I hope to keep the price around $800

[cyclop]

the engine parameters say 23 cc and other discription is 26 cc ???
also i think its a smartech Bigfoot or xtm Grizzly or another clone !
How much for these ? can you get them NOT RTR ?
Also if you say the parts are the same as the firehammer then 90% of the FG Marder parts would work as well ..
Good Luck you'll have a hoot with it after you upgrade a few things ..

[speedygonzales]

could you get more information on the disc break set up?
could you get the set up seperatly

[imported_offroader]

Originally Posted by cyclop

the engine parameters say 23 cc and other discription is 26 cc ???
also i think its a smartech Bigfoot or xtm Grizzly or another clone !
How much for these ? can you get them NOT RTR ?
Also if you say the parts are the same as the firehammer then 90% of the FG Marder parts would work as well ..
Good Luck you'll have a hoot with it after you upgrade a few things ..

I'll email the factory to clarify the size of the motor. Sorry the radio will come standard with these. These guys won't discount the price so we're better taking the radio and selling it off if we don't need them.

[imported_offroader]

Originally Posted by speedygonzales

could you get more information on the disc break set up?
could you get the set up seperatly

The disc brake is the same on the Firehammer check #17 here is the link to the site I don't think you would want this separately I know there's the Hydraulic system out there that works well and can be added to any FG or 1/5th scale
http://www.duratrax.com/cars/dtxd98-...-chassis.html#

[cyclop]

Originally Posted by speedygonzales

could you get more information on the disc break set up?
could you get the set up seperatly

Python has it listed on there site for the Baja now ... i think 199 for COMPLETE front disk brake setup ays you wont need a thing ..

[speedygonzales]

Originally Posted by cyclop

Python has it listed on there site for the Baja now ... i think 199 for COMPLETE front disk brake setup ays you wont need a thing ..

AWSOME!!!!!!!!!

going to check it out now.... i will give python a call soon. baja is in the basement ready for a modding and cleaning for the winter.

Quote:
Originally Posted by speedygonzales
could you get more information on the disc break set up?
could you get the set up seperatly

The disc brake is the same on the Firehammer check #17 here is the link to the site I don't think you would want this separately I know there's the Hydraulic system out there that works well and can be added to any FG or 1/5th scale
http://www.duratrax.com/cars/dtxd98-...-chassis.html#

srry i thought you ment cable disc set up.

[Flyingblind]

I think the only 1/6 scale that comes stock with front discs are the FG Competiton versions of their Truck/Hummer/Jeep/Monster Beetle. And it's not cheap. Around $3000 for the truck without radio and servos. But, it's got just about every option in the FG catalog except for the 2 speed and pipe (if you buy the Stadium version, as it doesn't fit under the stock body)

Basically, what I wrote off in that huge crash a few months ago...