[imported_iflybyu]

1...Hitec Lynx 3d with Novak xxl and aluminum case.

THis is a great radio on its own, or a great radio to outfit with the Spectrum system.

It includes the hitec spectra module(dial in any 75mhz freq), novak xxl rx.










2...New in box Mugen MST-1

Mugen MST-1 Built in box, never even had the engine mounted in it.

Was built using associated diff balls and rings. Includes all parts that came with the truck.

Also, a mugen mt12 engine that was just rebuilt with a new piston, sleeve and conrod. THis is equipped with an OS carb using a lunsford carb adapter. This makes the power this engine has much mor e managable to get to the ground.

A hitec 645 mg servo and a JR270 servo 1200mah 5 cell hump pack.

2 custom painted bodies, one was run before and the other isn't even cut out. The tires included are proline bowties(1-- 5 minute qualifier), Proline Edge(1-- 5 min qual), Losi minipins, never run.

And a proline ride height guage.

[imported_iflybyu]

3... Mugen MST-1 with Novarossi Mugen MT-12

Truck was build using associated diff rings and balls and optional aluminum wheel hexes.

MT-12 has the novarossi rotary carb installed to help smooth out the throtle with an OS .21 sized airfilter and brand new in package Associated pipe.

Radio gear

Hitec 645 (steering)
Hitec 5475 digital (throttle)
1200 mah reciever pack

Spares

New in pack
Front upright set
Hardened cvd outdrives
60tooth spur
Front arms
Rear arms
2 front axles
2 degree rear hubs
Lunsford OS carb adaptor
sleeve of bearings (front and rear bearings are the same)

New out of package

Front bulkhead
Clutch setup
Front tower
engine mounts
suspension mounts
Shock parts

Spring set
Tranny case

Includes carrying case, 2 bodies, and the following tires:

2 sets lugnuts(80-85%)
2 sets edges(90%)
1 set losi 4 rib(90%)
1 set losi minipin(100%)
1 set bowties(85%)

[imported_iflybyu]

I also have numerous tools, fluids, filters, etc that would be going. Also a hand held starter, large ofna carrying bag etc..

Asking $550.00 for it all, OR BEST OFFER.

If you want more pics just ask.

Mike

[imported_iflybyu]

THere is also an associated B3 with Novak Cyclone TC speed control and a bunch of 16 and 15 turn motors and an old losi buggy with a novak explorer speedo and a bunch of parts. A battery building jig, a motor stand, a shock rebuild stand, a discharge tray.

Hoping to get rid of all this stuff together, make an offer.

Mike