Register Now

imported_Kevin · 10-29-2006, 04:49 PM

Novak GTB esc and 5.5 turn and 7.5 turn Novak brushless motors.Both motors have little time on them.20 runs max on each.System was in a T4 and worked very well but 19 turn spec is going to be the class I will be running next season.Looking for $300.00 for all.Will not split the units up.Possible trades considerred.(B4 buggy,good esc's like QC2,GTX,or???)Thanks for looking.

imported_Kevin · 10-31-2006, 05:14 AM

Nobody looking for a good quality high end brushless system?Limited time here before it'll go to auction on November 10th.

imported_Portyansky · 10-31-2006, 05:48 AM

Why dont you use this esc, with the 19t motor? This esc is no limit. Just a thought.

samboneecanada · 10-31-2006, 02:10 PM

ttt

ttt11

imported_Kevin · 10-31-2006, 04:11 PM

Well I'm not using the esc with a 19 turn because I already have a few regular esc's kicking around that will do what I need and it would be a good thing for someone to pick up a barely used brushless system with 2 motors that give them some flexability as to track size or class.The 5.5 was too much for Sammy's large loose track but the 7.5 was good there and at Sid's in a T4.

phillmassacre · 10-31-2006, 05:21 PM

what is the lowest you will go. I can pick up a new novak 3.5 esc and motor for $288 shipped and taxes included.

imported_Kevin · 10-31-2006, 07:30 PM

That is a steel!?!?Considering Tower Hobbies is $259.99 and a separate 7.5 motor is $79.99 plus shipping and handling ,exchange into Canadian dollars and taxes on top of all that.So on a good guess it should be closer to $350.00 Canadian for just the GTB 3.5 combo landed here.If you are talking off-shore like R/C Mart or the like from Hong Kong it will be double what you see there once everybody has thier piece of you.Been there done that!I think $300.00 is fair.

k1e1v1i1n1 your pm box is full!I tried to PM you back.Willing to help you out if need be.

phillmassacre · 11-01-2006, 07:41 AM

no that is actually in canada, taxes and shipping. that's cool, thanks anyway. will buy new for $288

imported_k1e1v1i1n · 11-01-2006, 05:07 PM

all cleaned out 250 adds up pretty quick around here

imported_Kevin · 11-01-2006, 07:44 PM

PM'd you back k1e1v1i1n.

10-29-2006, 04:49 PM	#1
imported_Kevin RCC Junior Contributor Join Date: Jul 2006 Feedback: 0 / 0% Posts: 107 Total Props: 0	Novak GTB and 2 Motors Remove this ad - become a site supporter! Novak GTB esc and 5.5 turn and 7.5 turn Novak brushless motors.Both motors have little time on them.20 runs max on each.System was in a T4 and worked very well but 19 turn spec is going to be the class I will be running next season.Looking for $300.00 for all.Will not split the units up.Possible trades considerred.(B4 buggy,good esc's like QC2,GTX,or???)Thanks for looking. __________________ If you're not having fun you're doing it wrong! Knowledge is power;hand eye cordination is a different issue!
	.

10-31-2006, 05:14 AM	#2
imported_Kevin RCC Junior Contributor Join Date: Jul 2006 Feedback: 0 / 0% Posts: 107 Total Props: 0	Nobody looking for a good quality high end brushless system?Limited time here before it'll go to auction on November 10th. __________________ If you're not having fun you're doing it wrong! Knowledge is power;hand eye cordination is a different issue!
	.

10-31-2006, 02:10 PM	#4
samboneecanada RCC Expert Contributor I am: Sean H Join Date: Jan 2006 Location: Milton on Feedback: 0 / 0% Posts: 861 Total Props: 0	ttt ttt ttt11
	.

10-31-2006, 04:11 PM	#5
imported_Kevin RCC Junior Contributor Join Date: Jul 2006 Feedback: 0 / 0% Posts: 107 Total Props: 0	Well I'm not using the esc with a 19 turn because I already have a few regular esc's kicking around that will do what I need and it would be a good thing for someone to pick up a barely used brushless system with 2 motors that give them some flexability as to track size or class.The 5.5 was too much for Sammy's large loose track but the 7.5 was good there and at Sid's in a T4. __________________ If you're not having fun you're doing it wrong! Knowledge is power;hand eye cordination is a different issue!
	.

10-31-2006, 07:30 PM	#7
imported_Kevin RCC Junior Contributor Join Date: Jul 2006 Feedback: 0 / 0% Posts: 107 Total Props: 0	That is a steel!?!?Considering Tower Hobbies is $259.99 and a separate 7.5 motor is $79.99 plus shipping and handling ,exchange into Canadian dollars and taxes on top of all that.So on a good guess it should be closer to $350.00 Canadian for just the GTB 3.5 combo landed here.If you are talking off-shore like R/C Mart or the like from Hong Kong it will be double what you see there once everybody has thier piece of you.Been there done that!I think $300.00 is fair. k1e1v1i1n1 your pm box is full!I tried to PM you back.Willing to help you out if need be. __________________ If you're not having fun you're doing it wrong! Knowledge is power;hand eye cordination is a different issue!
	.

10-31-2006, 05:48 AM	#3
imported_Portyansky RCC Pro Contributor Join Date: Sep 2004 Feedback: 0 / 0% Posts: 1,564 Total Props: 0	Why dont you use this esc, with the 19t motor? This esc is no limit. Just a thought.
	.

10-31-2006, 05:21 PM	#6
phillmassacre Join Date: Mar 2006 Feedback: 0 / 0% Posts: 305 Total Props: 0	what is the lowest you will go. I can pick up a new novak 3.5 esc and motor for $288 shipped and taxes included.
	.

11-01-2006, 07:41 AM	#8
phillmassacre Join Date: Mar 2006 Feedback: 0 / 0% Posts: 305 Total Props: 0	no that is actually in canada, taxes and shipping. that's cool, thanks anyway. will buy new for $288
	.

11-01-2006, 05:07 PM	#9
imported_k1e1v1i1n RCC Pro Contributor Join Date: Jun 2005 Feedback: 0 / 0% Posts: 1,689 Total Props: 0	all cleaned out 250 adds up pretty quick around here
	.

11-01-2006, 07:44 PM	#10
imported_Kevin RCC Junior Contributor Join Date: Jul 2006 Feedback: 0 / 0% Posts: 107 Total Props: 0	PM'd you back k1e1v1i1n. __________________ If you're not having fun you're doing it wrong! Knowledge is power;hand eye cordination is a different issue!
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

vBulletin Message

Cancel Changes

Register Now

Log-in