[eyeinsky]

Hi guys

I just purchased my first large scale model. I've been at the full scale mechanic for over 25 year and model flying for about 6 years so naturally I've progress to this level.

The Velocity will be running OpenAero KK board stab system witch flying wing software will lend itself nicely to the stab control. My mix will require the flying wing ailevon mix on the main wing with a reverse acting control movement on the fwd mounted canard but I'm also we should have roll on the canard. The model is set with dual in all flight controls anyway. So big question should I run one KK board or go redundancy of two. I will be starting build tread over in the Giant scale section of the forum.

Here’s a couple of link on the concept if you’re not familiar with the KK control system:

http://www.rcgroups.com/forums/showthread.php?t=1554249
http://www.rcgroups.com/forums/showthread.php?t=1568554




I will continue to update the these first couple of pages with the latest completion of the project, feel free to and make suggestion, any help is welcome.

Jerry

[eyeinsky]

Reserve